PRODUCT SEARCH
Loading
Processing, Please wait...
67 part(s)
parts per page
PBPS02410ST
 
PBPS02410ST

Length: 36.25" Top Bottom Flanges: 6.50" x 9.37" Peterbilt Side Frame

Top Bottom Flanges each have 12 hole, 2 tapped 5/16 " NC threaded and 10 drilled clearance for 5/16 " bolts. Engine side of rail is flush with flange with seven 1/4 " NC threaded holes on side.. Two brackets on side - One for CAC and one for mounting pin. NOTE: Frames are not interchangeable.

PBPS07000ST
 
PBPS07000ST
Steel
Header: 30.75" x 9.62" 38 Bolt Holes Peterbilt Top Tank
This tank has two bolt-on type flanges with two 7/16 " NC threads in each, a 1.75 " hole for a filler neck, a 1/2 " NPT flange between the two bolt-on flanges, and a 1/8 " and three 1/4 " NPT flanges. This tank has a built-in baffle.
PBPS07010ST
 
PBPS07010ST
Steel
Header: 30.75" x 9.62" 38 Bolt Holes Peterbilt Top Tank
Two bolt-on type flanges with two 7/16 " N.C. threads in each. One 1/8 ", one 3/4 " and two 1/4 " N.P.T. fittings. One 1.75 " hole on top for filler neck
PBPS07020ST
 
PBPS07020ST
Stainless Steel

Header: 30.75" x 12.75" 42 Bolt Holes Peterbilt Top Tank

This tank is the same as tank #PB 700, except the header flange is wider

PBPS07030ST
 
PBPS07030ST
Steel
Header: 30.75" x 9.62" 38 Bolt Holes Peterbilt Top Tank
Two bolt-on type flanges with two 7/16 " N.C. threads in each. One 1/8 ", two 1/4 " and one 3/4 " N.P.T. fitting. One 1.75 " hole on top for filler neck.
PBPS07050ST
 
PBPS07050ST
Steel
Header: 41.00" x 9.50" 48 Bolt Holes Peterbilt Top Tank
Two bolt-on type flanges with two 7/16 " N.C. threads in each. One 1/2 " N.P.T. fitting between flanges. One 1/8 " and three 1/4 " N.P.T. fittings. One 1.75 " hole on top for filler neck. Built-in baffle. NOTE: Can be made to accommodate C.A.C.
PBPS07060ST
 
PBPS07060ST
Steel
Header: 37.50" x 8.00" 44 Bolt Holes Peterbilt Top Tank
Two bolt-on type flanges with two 7/16 " N.C. threaded holes in each. Two 1/4 ", two 3/8 " and one 1/8 " N.P.T. fittings. One 3/4 " N.P.T. fitting on passenger
PBPS07070ST
 
PBPS07070ST
Steel
Header: 37.50" x 6.50" 42 Bolt Holes Peterbilt Top Tank
PBPS07080ST
 
PBPS07080ST
Steel
Header: 37.50" x 6.50" 42 Bolt Holes Peterbilt Top Tank
The top part of the tank is 7.25 " from the edge of the header on each side. There is a 2.50 " diameter hose connection, a 1.00 " diameter hose connection, a 3/8 " diameter hose connection, a 1/4 " NPT flange, three 5/16 " NC threaded nuts in the tank, and a 1.25 " hole on top for filler neck.
PBPS07090ST
 
PBPS07090ST

Header: 37.50" x 6.50" 42 Bolt Holes Peterbilt Top Tank

This tank has two bolt-on type connections with two 3/8 " NC threaded holes in each, five 3/8 " NPT flanges and one 3/4 " NPT flange facing the engine, a 1.75 " diameter hole on top for filler neck, a 3/8 " NC threaded hole on top next to the filler neck, three 1/4 " NC threaded holes in the tank on the front overhang, and two 1/4 " NC threaded nuts welded on the header on front and one facing the engine.

PBPS07100ST
 
PBPS07100ST
Steel
Header: 30.00" x 7.00" 38 Bolt Holes Peterbilt Bottom Tank
This tank has two bolt-on type flanges with two 7/16 " NC threads in each, a bolt-on type flange on the opposite side with two 5/16 " NC threads, and two mounting holes with 5/8 " NC threads @ 16.00 " centers.
PBPS07110ST
 
PBPS07110ST
Steel
Header: 30.00" x 8.50" 38 Bolt Holes Peterbilt Bottom Tank
This tank has a bolt-on type flange on the front with four 7/16 " NC threaded holes, a bolt-on type flange on the back with two 5/16 " NC threaded holes, and two mounting holes with 5/8 " NC threads @ 16.00 " centers.
PBPS07120ST
 
PBPS07120ST
Steel
Header: 30.00" x 8.50" 38 Bolt Holes Peterbilt Bottom Tank
This tank has two bolt-on type flanges with two 7/16 " NC threads in each, a bolt-on type flange on the opposite side with two 5/16 " NC threads, and two mounting holes with 5/8 " NC threads @ 16.00 " centers.
PBPS07130ST
 
PBPS07130ST
Steel
Header: 30.00" x 8.50" 38 Bolt Holes Peterbilt Bottom Tank
This tank has two bolt-on type flanges with two 7/16 " NC threaded holes in each, a bolt-on type flange with two 5/16 " NC threaded holes on the opposite side, and two mounting holes with 5/8 " NC threads @ 16.00 " centers. The center of the tank has a cut-out to accommodate a PTO.
PBPS07140ST
 
PBPS07140ST
Steel
Header: 40.50" x 7.00" 46 Bolt Holes Peterbilt Bottom Tank
This tank has a bolt-on type flange with four 7/16 " NC threaded holes on the front side, a bolt-on type flange with two 5/16 " NC threaded holes on the backside, and mounting holes with 5/8 " NC threads @ 16.00 " centers.
PBPS07150ST
 
PBPS07150ST
Steel
Header: 37.50" x 8.00" 44 Bolt Holes Peterbilt Bottom Tank
One bolt-on type flange positioned on a slant with three 3/8 " N.C. threads. One bolt-on type flange on opposite side with two 5/16 " N.C. threads. Four 1/4 " N.C. threaded nuts on header. Two mounting holes with 5/8 " threads at 22.00 " centers.
PBPS07160ST
 
PBPS07160ST
Steel
Header: 40.50" x 7.00" 46 Bolt Holes Peterbilt Bottom Tank
Two bolt-on type flanges with two 7/16 " N.C. threads in each. One bolt-on type flange on opposite side, in center, with two 5/16 " N.C. threads. Two mounting holes with 5/8 " N.C. threads at 16.00 " centers
PBPS07170ST
 
PBPS07170ST
Stainless Steel

Header: 30.00" x 7.00" 36 Bolt Holes Peterbilt Bottom Tank

Two bolt-on type flanges with two 7/16 " N.C. threads in each. One bolt-on type flange with two 5/16 " N.C. threads. Two mounting holes with 5/8 " N.C. threads at 16.00 " centers. Tank dips in the middle for P.T.O

PBPS07180ST
 
PBPS07180ST
Steel
Header: 37.50" x 6.50" 42 Bolt Holes Peterbilt Bottom Tank
One bolt-on type flange with four 7/16 " N.C. threaded holes. One 3/8 " N.P.T. fitting. Two 1/4 " N.C. threaded nuts mounted on header flange
PBPS07190ST
 
PBPS07190ST
Steel
Header: 37.50" x 6.50" 42 Bolt Holes Peterbilt Bottom Tank
This tank has a 3.00 " diameter hose connection facing to ground. Note: This tank pairs with top tank #PB 708.
PBPS07200ST
 
PBPS07200ST
Steel
Length: 37.50" Top Flange: 9.62" x 7.00" Bottom Flange: 7.00" x 5.75" Peterbilt Side Frame
Top flange has 11 bolt holes drilled clearance for 5/16 " bolts. Bottom flange has 8 bolt holes drilled clearance for 5/16 " bolts. One angle mount on grille side. Various other holes for brackets, etc. NOTE: Frames are not interchangeable. Order left for driver
PBPS07210ST
 
PBPS07210ST
Steel
Length: 30.00" Top Flange: 9.62" x 7.00" Bottom Flange: 7.00" x 5.75" Peterbilt Side Frame
Same as model #PB 720 except shorter. NOTE: Frames are not interchangeable. Order left for driver
PBPS07220ST
 
PBPS07220ST
Steel
Length: 37.50" Top Flange: 13.00" x 7.00" Bottom Flange: 8.75" x 5.75 Peterbilt Side Frame
Top flange has 13 bolt holes drilled clearance for 5/16 " bolts. Bottom flange has 9 bolt holes drilled for 5/16 " bolts. One angle mount on grille side. Various other holes for brackets, etc. NOTE: Frames are not interchangeable. Order left for driver
PBPS07230ST
 
PBPS07230ST
Steel
Length: 41.37" Top Bottom Flanges: 8.00" x 9.25" Peterbilt Side Frame
Flanges on both ends have 13 holes, all clearance for 5/16 " bolts. One angle on each side, full length with five 1/4 " N.C. threaded nuts on each. NOTE: Frames are interchangeable.
PBPS07240ST
 
PBPS07240ST
Steel
Length: 36.25"Header: 6.50" x 9.37"Peterbilt Left Side Frame Rail
Top and bottom flanges each have 12 holes, ten drilled clearance for 5/16 " bolts and two tapped 5/16 " N.C. One bracket on side of channel near top with two holes drilled clearance for 1/2 " bolts. Angle brackets on each side of channel with 1/4 " N.C. threaded holes. Note: frames are not interchangeable. Order left or right accordingly.
PBPS11370ST
 
PBPS11370ST

Header: 30.75" x 9.62" 38 Bolt Holes Peterbilt Top Tank

This tank has a bolt-on style flange 11.00 " from the edge of the tank to the center of the hose connection, a 1/4 " NPT flange, and a filler neck hole in the top of the tank.

PBPS17110ST
 
PBPS17110ST

Header - 31.62" x 2.75" Peterbilt/Kenworth Solder on Tank

Inlet Outlet have a 2.50 " Connection 1/4 " NPT 4 Mounting Bosses to Attach Side Frames Identical to KW110409A except the height of the Upper Connection

PBPS25080ST
 
PBPS25080ST

Header: 41.00" x 8.75"48 Bolt Holes Peterbilt Top Tank

This tank is a modified version of tank #PB 705. Identical, except for being narrower in width.

PBPS27030ST
 
PBPS27030ST
Steel

Header: 23.75" x 2.75" Peterbilt Solder On Tank

Top Tank This tank has a 2.50 " diameter hose connection 8.50 " from the edge of the tank to the center of the hose connection, and a 1/4 " NPT flange to accommodate a barb fitting. Bottom Tank This tank has a 2.50 " hose connection 4.00 " from the edge of the tank to the center of the hose connection, and 1/4 " NPT flange to accommodate a drain cock.

PBPS27040ST
 
PBPS27040ST
Steel

Header: 23.75" x 2.75" Peterbilt Solder On Tank

Both of these tanks are identical. Each has a 2.50 " hose connection 4.00 " from the edge of the tank to the center of the hose connection, and a 1/4 " NPT flange for either a drain cock or a vent. This tank set comes with a 1/4 " NPT drain cock, and a 1/4 " NPT x 3/8 " hose barb.

PBPS27070ST
 
PBPS27070ST
Steel

Header: 22.75" x 3.00" Peterbilt Complete Set

Top Tank This tank has a 2.50 " diameter hose connection 8.50 " from the edge of the tank to the center of the hose connection, a 1/4 " NPT flange for a barb fitting, and two mounting pins. Bottom Tank This tank has a 2.50 " diameter hose connection 5.75 " from the edge of the tank to the center of the hose connection and pointing towards the ground, and two mounting pins. Side Frames These frames are 35.75 " long, with two indentations with holes in the center. These frames are interchangeable.

PBPS27080ST
 
PBPS27080ST

Header: 39.87" x 3.12" Peterbilt Solder On Tank Fits Radiator # PB67 Brass Kit # is a PB9506

Top Tank This tank has a 2.50 " diameter hose connection 13.00 " from the edge of the tank to the center of the hose connection, a 1/4 " NPT flange for a vent, and two mounting bosses at each end of the tank. Bottom Tank This tank has a 2.50 " diameter hose connection 12.87 " from the edge of the tank to the center of the hose connection pointing towards the ground, and two mounting bosses at each end of the tank. This set is supplied with eight 5/16 " x 4 1/2 " bolts with nuts, and a 90 degree hose barb for the vent. Note: this tank set matches brass kit #9505.

PBPS27090ST
 
PBPS27090ST
Steel

Header: 39.87" x 2.75"Peterbilt Solder On Tank

Top Tank This tank has a 2.50 " diameter hose connection 13.00 " from the edge of the tank to the center of the hose connection, a 1/4 " NPT flange for a vent, and two mounting bosses at each end of the tank. Bottom Tank This tank has a 2.50 " diameter hose connection 12.87 " from the edge of the tank to the center of the hose connection pointing towards the ground, and two mounting bosses at each end of the tank. This set is supplied with eight 5/16 " x 4.50 " bolts with nuts, and a 90 degree hose barb for the vent. Note: this tank set matches brass kit #PB 9506.

PBPS27120ST
 
PBPS27120ST
Steel

Header: 41.50" x 2.87" Peterbilt Solder On Tank

Both of these tanks are identical. Each has a 2.50 " diameter hose connection 13.87 " from the edge of the tank to the center of the hose connection, two mounting bosses on each end to attach side frames, and a 1/4 " NPT flange to accommodate a drain cock or expansion fitting. This tank set is supplied with eight 5/16 " x 4.50 " bolts with nuts, a 1/4 " NPT drain cock, and a 1/4 " NPT 90 degree hose barb.

PBPS31890ST
 
PBPS31890ST
Steel
Bracket: 22.00" x 6.50" 22 Bolt Holes Peterbilt Bracket
This mounting bracket is the same as bracket #PB 7191, except that it has only two holes that are centered instead of four holes off center.
PBPS43090ST
 
PBPS43090ST

Header: 37.00" x 3.00" Peterbilt Solder On Tank

Top Tank This tank has a 2.50 " diameter hose connection, four mounting bosses to attach side frames, and a 1/4 " NPT flange for an expansion fitting. Bottom Tank This tank has a 2.50 " diameter hose connection, and four mounting bosses to attach the side frames.

PBPS70710ST
 
PBPS70710ST
Steel
Header: 37.50" x 6.50" 42 Bolt HolesPeterbilt Top Tank
This low flow tank comes complete with a check valve. There is a 1 1/4 " diameter hose connection on the driver side bent slightly up and towards the center, two 1 " diameter hose connections on 90 angle, a 3/8 " diameter hose connection on the top driver side, a 1/4 " NPT flange, and three 5/16 " NC threaded holes in the tank (one on top and two on the front). A baffle splits the tank left to right.
PBPS70800ST
 
PBPS70800ST

Header: 37.50" x 6.50" 42 Bolt Holes Peterbilt Top Tanks

This top tank is the same as tank #PB 708, except that the filler neck hole and the slope of the tank is on the opposite side.

PBPS70810ST
 
PBPS70810ST
Steel
Header: 37.50" x 6.50" 42 Bolt Holes Peterbilt Top Tank
This tank has a 2.50 " diameter hose connection, and two 1/4 " NPT flanges 7.00 " and 3.00 " from the end of the tank. Note: this tank is identical to tank #PB 7081, except it has a 2.50 " hose connection instead of a 3.00 " hose connection.
PBPS70820ST
 
PBPS70820ST
Steel
Header: 37.50" x 6.50" 42 Bolt Holes Peterbilt Top Tank
This tank has a 3.00 " diameter hose connection, and two 1/4 " NPT flanges 7.00 " and 3.00 " from the end of the tank. Note: this tank is identical to tank #PB 7081, except it has a 3.00 " hose connection instead of a 2.50 " hose connection.
PBPS70900ST
 
PBPS70900ST
Steel
Header: 37.50" x 6.50" 42 Bolt Holes Peterbilt Top Tank
This tank is the same as tank #PB 709, except that there is a baffle welded inside the header 18.25 " from the driver
PBPS71700ST
 
PBPS71700ST
Steel
Header: 37.50" x 6.50" 3.00" Hose Connection 42 Bolt Holes
PBPS71710ST
 
PBPS71710ST
Steel
Header: 31.25" x 6.12" 42 Bolt Holes Peterbilt Bottom Tank
This tank has a 2.50 " hose connection that comes out at the bottom of the tank then bends 90 degree, a 1/4 " NPT flange for a drain cock, and a PTO cut-out in the center of the tank. Note: bolt pattern is the same as a #PB 514 or a #PB 800
PBPS71720ST
 
PBPS71720ST
Steel
Header: 37.50" x 6.50" 42 Bolt Holes Peterbilt Bottom Tank
This tank has a 2.50 " diameter hose connection 15.75 " from the edge of the tank to the center of the hose connection that comes straight out the bottom of the tank. Note: bolt pattern is the same as a #PB 719.
PBPS71730ST
 
PBPS71730ST
Steel
Bracket: 26.62" x 6.50" 26 Bolt Holes Peterbilt Bracket
This mounting bracket has two 11/16 " diameter holes for mounting bolts @ 18.75 " centers, and a 4.00 " diameter hole to allow clearance for the hose connection. Note: matches with #PB 719 tank
PBPS71800ST
 
PBPS71800ST
Steel
Header: 37.50" x 6.50" 42 Bolt Holes Peterbilt Bottom Tank
This low-flow tank has one 1 1/4 " diameter hose connection on a 90 angle facing up and out to passenger side on approximately 45 angle. One 1/4 " NPT flange for a drain fitting on the deep section of the tank.
PBPS71820ST
 
PBPS71820ST
Steel
Length: 37.50" 19 Bolt Holes Peterbilt Washer Bar
Same as #PB 7183, but without any holes threaded.
PBPS71830ST
 
PBPS71830ST
Steel

Length: 37.50" 19 Bolt Holes Peterbilt Washer Bar

3 holes threaded 5/16 " N.C. (matches 708)

PBPS71840ST
 
PBPS71840ST
Steel

Length: 4.37" 2 Bolt Holes Peterbilt Washer Bar

Short bars for the ends of the header.

PBPS71850ST
 
PBPS71850ST
Steel

Length: 18.50" 9 Bolt Holes Peterbilt Washer Bar

For under headers - between our 724 7241 rails

67 part(s)
parts per page