PRODUCT SEARCH
Loading
Processing, Please wait...
10 part(s)
OSPS07850ST
 
OSPS07850ST
Steel
Header: 38.50" x 7.25"46 Bolt Holes
Two bolt on type flanges with two 7/16" N.C. threaded holes in each. One1/8" N.P.T. fitting, two 1/4" N.P.T. fittings and three 3/4" N.P.T. fittings -one facing engine and two on top of the tank. Three brackets on tank facingengine. Three brackets on top of tank and two angle brackets on front oftank. One 2.00" O.D. pipe on top of tank for filler neck.
OSPS07860ST
 
OSPS07860ST
Steel
Header: 38.50" x 7.25"46 Bolt Holes
Tank is 1.50" deep. Two 5/8" N.C. threaded mounting nuts at 8.00" centers.Two bolt on type flanges, both with two 7/16" N.C. threaded holes at 3.56" centers and one with an additional four 3/8" N.C. threaded holes. One 3/8" N.P.T. drain.
OSPS07870ST
 
OSPS07870ST
Steel
Header: 30.00" x 6.37" 40 Bolt Holes Bottom Tank
This tank is 1.50 " deep. It has two 5/8 " NC threaded mounting nuts at 8.00 " centers, two bolt-on type flanges both with two 7/16 " NC threaded holes at 3.56 " centers and one with an additional four 3/8 " NC threaded holes, and a 3/8 " NPT drain.
OSPS41480ST
 
OSPS41480ST

Header: 27.00" x 6.50" 34 Bolt Holes Ottawa Shunt Truck Bottom Tank

This tank has a bolt-on style flange to accommodate a 2.25 " diameter hose connection. This flange angles slightly upward. There is a 10 plate oil cooler with 18.00 " centers (DRC 1018PC), a 1/4 " NPT flange for a drain cock, a 1/2 " NPT flange, a 3/4 " flange on the bottom, and a large mounting bracket in the center of the tank.

OSPS51990ST
 
OSPS51990ST

Header: 26.00" x 6.00" 32 Bolt Holes Ottawa Shunt Truck Bottom Tank

This tank has a 2.00 " diameter hose connection, a 1.00 " diameter bypass connection, a 1/2 " NPT flange, a 1/4 " NPT flange for a drain cock on the grill side of the tank, a mounting bracket with three holes for bolting into the unit and one larger hole for the isolation rubber, an extension bracket with the same bolt pattern as the mounting bracket, and a seven plate oil cooler with 18.00 " centers (DRC 718PC).

OSPS52000ST
 
OSPS52000ST

Length: 24.00"Header: 6.00" x 4.50" Ottawa Shunt Truck Side Frame

This frame has four bolt holes on each flange, eight 5/16 " NC threaded holes on the back of the frame, a block on the back of the frame with twelve 3/8 " NC threaded holes to attach the mounting bracket (sold separately - part #OS 051909D), and three 5/16 " NC threaded holes along the side of the frame for mounting the shroud.

OSPS52010ST
 
OSPS52010ST

Ottawa Shunt Truck Shroud

This shroud has overall dimensions of 26.00 " x 24.50 " x 4.00 " deep. There is a 23.75 " diameter hole for the fan, four 5/16 " threaded mounting nuts, six slotted holes for mounting the shroud to the radiator, and two large access slots to accommodate a hose.

OSPS52020ST
 
OSPS52020ST

Ottawa Shunt Truck Mounting Bracket

This bracket attaches to side frame #OS 051909B. It has one large hole for an isolation grommet. Note: brackets are for left or right - order accordingly

OSPS53170ST
 
OSPS53170ST

Header: 27.00" x 6.50" 34 Bolt Holes

This Ottawa Shunt Truck tank has two bolt-on style flanges to accommodate 2.25 " diameter hose connections. The flanges are 2.50 " in from the edge of the tank to the center of the flange, and they angle upward slightly towards the engine. There is a 12 plate 16.00 " center oil cooler with 3/4 " NPT fittings, positioned between the flanges, a 1/4 " NPT flange near the bottom of the tank for a drain cock, and a large mounting bracket at the bottom center of the tank.

OSPS72890ST
 
OSPS72890ST

Length: 30.37" Header: 6.50" x 4.50" Ottawa Shunt Truck Side Frame

This frame has four 5/16 " NC threaded holes and four 1/4 " NC threaded holes along the back, and a block with a series of 3/8 " NC threaded holes to attach a mounting bracket to the back of the frame.