PRODUCT SEARCH
Loading
Processing, Please wait...
86 part(s)
parts per page
MKPS66190ST
 
MKPS66190ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
One 2.50 " O.D. hose connection on driver
MKPS66200ST
 
MKPS66200ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
One 2.50 " O.D. hose connection on driver
MKPS66210ST
 
MKPS66210ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
This tank has a 3.50 " diameter hose connection straight out the bottom approximately 16.00 " in from end, a 3/8 " NPT fitting on the bottom, and two keyhole type mounting holes 19.50 " from the end of one key to the end of the other.
MKPS66220ST
 
MKPS66220ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
This tank has a 3.00 " diameter hose connection, and two keyhole brackets @ 15.75 " center. Note: tank #MK 6625 is the same tank with a 3.50 " diameter hose connection.
MKPS66230ST
 
MKPS66230ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
This tank has a 3.00 " diameter hose connection, two keyhole brackets @ 15.75 " centers, and a 3/8 " NPT flange.
MKPS66250ST
 
MKPS66250ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
This tank has a 2.50 " diameter hose connection, a 1/4 " NPT flange, and a 7 plate oil cooler with 18.00 " centers. Note: this tank is similar to tank #MK 6628, except that it has a 38 BH bolt pattern instead of a 34 BH bolt pattern. (check before ordering)
MKPS66260ST
 
MKPS66260ST
Steel
Header: 28.87" x 6.37" 38 Bolt Holes Mack Bottom Tank
This tank has a 2.50 " diameter hose connection, a 3/8 " NPT flange, and a 7 plate oil cooler with 18.00 " centers.
MKPS66270ST
 
MKPS66270ST
Steel
Header: 36.37" x 6.25" 46 Bolt HolesMack Bottom Tank
This tank has a 1.00 " diameter and a 1.25 " diameter hose connection, two keyhole brackets that sit low on the tank @ 15.75 " centers, and two 1/4 " NPT flanges. A baffle in the center of the tank, splits the radiator front to back.
MKPS66280ST
 
MKPS66280ST
Steel
Header: 28.87" x 6.37" 34 Bolt Holes Mack Bottom Tank
This tank has a 2.50 " diameter hose connection, a 3/8 " NPT flange, and a 7 plate oil cooler with 18.00 " centers. Note: this tank is similar to tank #MK 6624, except it has a 34 BH bolt pattern instead of a 38 BH bolt pattern. (check before ordering)
MKPS66290ST
 
MKPS66290ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
This tank has a 2.50 " diameter hose connection on the driver 's side facing the engine, a 3/8 " NPT flange on the bottom of the tank, and two keyhole type mounting brackets on the bottom of the tank. This tank comes with an oil cooler installed and can be ordered with either a 7 plate or 10 plate oil cooler with 3/4 " NPT fittings spaced @ 18.00 " center to center facing the engine. Note: tank #MK 6619 is identical except without an oil cooler.
MKPS66310ST
 
MKPS66310ST
Steel

Header: 29.50" x 6.50" 38 Bolt HolesMack Bottom Tank

One bolt on type flange with four 7/16 " N.C. threaded holes. Two 5/8 " N.C. mounting holes at 9.00 " centers. NOTE: Same as #MK 663 but shorter.

MKPS66320ST
 
MKPS66320ST
Steel
Header: 28.87" x 6.37" 34 Bolt Holes Mack Bottom Tank
This tank has a 2.50 " diameter hose connection, a 3/8 " NPT flange for a drain cock, and a 7 plate oil cooler with 18.00 " centers (718PC). Note: this tank is similar to a #MK 6626, but with 34 bolt holes.
MKPS66330ST
 
MKPS66330ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
This tank is the same as tank #MK 6627LF, but with taller keyhole brackets.
MKPS66410ST
 
MKPS66410ST
Steel
Header: 29.50" x 6.12" 44 Bolt Holes Mack Bottom Tank
Tank has a 5.00 " wide x 1.00 " deep cut-out in center of header for power take off, creating two 6.12 " x 12.25 " header flanges with 22 bolt holes each. Flanges mounts are the same as #MK 664.
MKPS66510ST
 
MKPS66510ST
Steel
Header: 33.00" x 6.37"40 Bolt HolesMack Bottom Tank
This tank is a mirror image of tank #MK 665, so the rectangular flange is on passenger
MKPS66570ST
 
MKPS66570ST
Steel
Header: 42.00" x 6.25" 48 Bolt Holes Mack Top Tank
This tank has twenty 5/16 " NC threaded holes in the baffle, a 2.00 " diameter hose connection facing the engine 15.00 " in from drivers side, a 3/8 " NPT flange facing engine, a slot in the baffle, and a 1.25 " hole on top for a filler neck 15.00 " from the passenger side.
MKPS66580ST
 
MKPS66580ST
Steel
Header: 28.87" x 6.37" 38 Bolt Holes Mack Top Tank
This tank has a 2.00 " diameter hose connection that comes out on a 90 degree angle and points slightly to the passenger side. The connection is 10.75 " from the edge of the tank to the center of the hose connection, and is offset towards the grill side of the tank. Note: this tank matches with bottom tank #MK 6626.
MKPS66590ST
 
MKPS66590ST
Steel
Header: 28.87" x 6.37" 34 Bolt Holes Mack Top Tank
This tank has a 2.00 " diameter hose connection 10.50 " from the edge of the tank to the center of the hose connection. Note: the bolt pattern is the same as a #MK 6612
MKPS66710ST
 
MKPS66710ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Top Tank
This tank has a 2.50 " hose connection 9.50 " from the edge of the tank to the center of the hose connection. Note: bolt pattern is the same as a #MK 6618 tank.
MKPS66910ST
 
MKPS66910ST
Steel
Header: 29.62" x 6.50" 38 Bolt Holes Mack Top Tank
Two bolt-on type flanges facing engine. One bolt-on type flange on front-top of tank for filler neck. One bolt-on type flange under over-hang for 1 " hose connection. Two 1/4 " and one 3/8 " N.P.T. fitting facing engine. Three 3/8 " N.C. threaded holes on each end of tank, facing engine. One cut-out on corner.
MKPS66920ST
 
MKPS66920ST
Steel
Header: 40.00" x 6.50" 48 Bolt Holes Mack Top Tank
One 2.00 " O.D. hose connection, 12.00 " in from driver
MKPS67110ST
 
MKPS67110ST
Steel
Length: 30.37" Top Bottom Flange: 6.25" x 6.00" Mack Side Frame
Each flange has 10 holes, four tapped 5/16 " N.C. and drilled clearance for 5/16 " bolts. One angle bracket with a 3/8 " slotted hole 7.75 " down from end. One angle bracket with a 3/8 " hole 10.25 " from end to center. Two 5/16 " N.C. holes on back of channel. Five 5/16 " N.C. holes on one side of channel. NOTE: Frames are not interchangeable. Order left for driver
MKPS67120ST
 
MKPS67120ST
Steel
Length: 36.87" Top Flange: 10.25" x 5.12" Bottom Flange: 6.00" x 5.12" Mack Side Frame
Top flange is
MKPS67140ST
 
MKPS67140ST
Steel
Length: 29.37" Top Bottom Flange: 6.25" x 10.75" Mack Side Frame
Each flange has 14 holes, 4 tapped 5/16 " N.C. and 10 drilled clearance for 5/16 " bolts. Three 5/16 " N.C. threaded holes on each side of rail. (On one side they are evenly spaced one the other side they are grouped close to one end.) Twelve holes on back of channel in 3 groups of 4. Eight of the holes are drilled 11/32 " and the other four have a 5/16 " N.C. thread. NOTE: Frames are not interchangeable. Order left for driver
MKPS67150ST
 
MKPS67150ST
Steel
Length: 29.00" Top Bottom Flange: 6.25" x 5.87" Mack Side Frame
Each flange has 10 holes, 4 tapped 5/16 " N.C. threads and 6 drilled clearance for 5/16 " bolts. One angle bracket 18.50 " down from end, with a 3/8 " diameter hole. One 5/16 " N.C. hole on one side of the channel and five 5/16 " N.C. holes on the other. Two 5/16 " N.C. holes on back of channel. NOTE: Frames are not interchangeable. Order left for driver
MKPS67160ST
 
MKPS67160ST
Steel
Length: 38.62" Top Bottom Flange: 6.25" x 6.00" Mack Side Frame
Top and bottom flanges each have 7 holes, 4 tapped 5/16 " N.C. and 3 drilled clearance for 5/16 " bolts. Two sleeves for cross bars welded to gussets. Total of 31 - 5/16 " N.C. threaded holes on channel, 5 on one side, 6 on other side and 20 on flat side of channel. NOTE: Frames are not interchangeable. Order left for driver
MKPS67170ST
 
MKPS67170ST
Steel
Length: 40.00" Top Bottom Flange: 6.25" x 6.00" Mack Side Frame
Top bottom flanges each have 7 holes, 4 tapped 5/16 " N.C. threads and 3 drilled clearance for 5/16 " bolts. Two sleeves for cross bars welded to gussets. Total of 36 - 5/16 " N.C. threaded holes on channel, 5 on engine side, 9 on grille side and 22 on flat side of channel. NOTE: Frames are not interchangeable. Order left for driver
MKPS67190ST
 
MKPS67190ST
Steel
Length: 38.93" Header: 6.37" x 6.37" 10 Bolt Holes Mack Side Frame
These frames have three 5/16 " NC threaded holes along the grill side of the frame, and eight 5/16 " NC threaded holes along the back of the frame, one mounting bracket on the back of the frame, and an offset header. Order Left or Right as these frames are not interchangeable. Note: these frames match with tank #MK 6626.
MKPS67610ST
 
MKPS67610ST
Steel
Length: 37.12" Top Bottom Flange: 6.37" x 7.00" Mack Left Side Frame Rail
Top and bottom flanges each have 10 holes, 6 drilled clearance for 5/16 " bolts and four tapped 5/16 " N.C. Top flange also has a bracket extending the width to 9.00 ", with two holes drilled clearance for 5/16 " bolts. Frame has three angle brackets, two with 3/4 " diameter holes and one with 3/8 " diameter hole. Various other holes for shroud, brackets, etc. NOTE: Frames are not interchangeable. Order left for driver
MKPS67620ST
 
MKPS67620ST
Steel
Length: 39.75" Top Bottom Flanges: 6.75" x 4.50" deep on side 8.00" deep on the other Mack Side Frame
Both flanges have 10 holes, 2 tapped 3/8 " N.C. and 8 drilled clearance for 3/8 " bolts. Two angle brackets on side, with a 5/16 " N.C. threaded hole in each. Various other holes for shroud and brackets, etc. NOTE: Frames are not interchangeable. Order left for driver
MKPS67630ST
 
MKPS67630ST
Steel
Length: 37.12" Top Bottom Flange: 6.37" x 7.00" Mack Right Side Frame Rail
Top and bottom flanges each have 10 holes, 6 drilled clearance for 5/16 " bolts and four tapped 5/16 " N.C. Top flange also has a bracket extending the width to 9.00 ", with two holes drilled clearance for 5/16 " bolts. Frame has three angle brackets, two with 3/4 " diameter holes and one with 3/8 " diameter hole. Various other holes for shroud, brackets, etc. NOTE: Frames are not interchangeable. Order left for driver
MKPS80150ST
 
MKPS80150ST
Steel
Length: 35.12" Top Flange: 10.37" x 4.62" Bottom Flange: 6.00" x 4.18" Mack Side Frame
Top flange has 12 bolt holes. Bottom flange has 9 bolt holes, 4 of which are threaded 5/16 " N.C. Back of the frame has nine 3/8 " N.C. threaaded holes. Note: frames are not interchangeable, order left for driver 's side or right for passenger 's side or pairs. (left side shown here.)
MKPS91580ST
 
MKPS91580ST
Steel
Length: 38.12" Header: 6.25" x 6.00" 10 Bolt Holes Mack Side Frame
This side frame is almost identical to frame #MK 6716, with the exception of the full horseshoe flange, and it is 1/2 " shorter than #MK 6716.
MKPS92280ST
 
MKPS92280ST
Steel

Header: 37.12" x 6.00" 44 Bolt HolesMack Top Tank

This is almost identical to tank #MK 667, except it has been modified to accommodate a charged air cooler. Also, the 1.00 " diameter bypass hose has been eliminated as well as the three threaded holes in each corner of the tank.

MKPS96000ST
 
MKPS96000ST
Steel
Header: 40.25" x 2.75" Mack Solder On Tank
MKPS96040ST
 
MKPS96040ST
Steel
Header: 22.37" x 2.75" Mack Solder On Tank
These tanks have a 2.00 " diameter hose connection, a mounting bracket on each end, and a 1/4 " NPT flange for either a drain cock or an expansion fitting.
MKPS96050ST
 
MKPS96050ST
Steel
Header: 40.25" x 2.75" Mack Solder On Tank
2.00 " hose connection OD, 14.00 " from end to center of hose, 2 pins on each end, also available in steel solder dipped
86 part(s)
parts per page