PRODUCT SEARCH
Loading
Processing, Please wait...
86 part(s)
parts per page
MKPS06590ST
 
MKPS06590ST
Steel
Header: 29.50" x 10.25" 42 Bolt Holes Mack Top Tank
Two bolt on type flange connections facing engine with two 3/8 " N.C. threaded holes in each. One 3/4 ", one 3/8 " and two 1/4 " N.P.T. fittings facing engine. Two groups of three 3/8 " N.C. threaded holes near each end of tank facing engine. One hole on top passenger - engine side for filler neck. NOTE: Matches #MK 664 or #MK 664-1 bottom tank
MKPS06600ST
 
MKPS06600ST
Steel
Header: 37.00" x 6.00" 44 Bolt Holes Mack Bottom Tank
This tank has two bolt-on type flanges with two 7/16 " threaded holes in each, and two mounting brackets with holes @ 8.00 " centers.
MKPS06610ST
 
MKPS06610ST
Steel
Header: 33.00" x 6.37" 40 Bolt Holes Mack Bottom Tank
One 2.50 " O.D. hose connection on driver
MKPS06620ST
 
MKPS06620ST
Steel
Header: 37.00" x 6.87" 44 Bolt Holes Mack Bottom Tank
Same as model #MK 660 except header is 7/8 " wider and mounting brackets are higher.
MKPS06630ST
 
MKPS06630ST
Steel
Header: 40.00" x 6.50" 48 Bolt Holes Mack Bottom Tank
This tank has a bolt-on type flange angled at approximately 40 degrees, with four 7/16 " NC threaded holes. There are two 5/8 " NC mounting holes @ 9.00 " centers.
MKPS06640ST
 
MKPS06640ST
Steel
Header: 29.50" x 6.25" 40 Bolt Holes Mack Bottom Tank
One flange in center of tank with a 2.75 " dia. hole and two bolt holes with 7/16 " N.C. threads. One flange on driver
MKPS06650ST
 
MKPS06650ST
Steel
Header: 33.00" x 6.37" 40 Bolt Holes Mack Bottom Tank
This tank has a bolt-on type flange on the driver
MKPS06670ST
 
MKPS06670ST
Steel
Header: 37.12" x 6.00" 44 Bolt Holes Mack Top Tank
Two bolt-on type flanges with two 3/8 " N.C. threaded holes in each. One 1.00 " O.D. hose connection. One 3/8 " and one 1/4 " N.P.T. fittings. One 1.75 " hole on top for filler neck. NOTE: 1.00 " O.D. hose connection is closed when shipped. By either cutting open 1.00 " O.D. hose connection or drilling a series of 3/8 " holes in baffle, this tank can be used in two different models of Mack trucks. Matches model #MK 660 Mack bottom tank.
MKPS06680ST
 
MKPS06680ST
Steel
Header: 37.12" x 6.75" 44 Bolt Holes Mack Top Tank
Two bolt-on type connections with two 3/8 " N.C. threaded holes each. One 3/8 " N.P.T. fitting. One 1.75 " hole in top for filler neck. Matches model #MK 662 Mack bottom tank.
MKPS06690ST
 
MKPS06690ST
Steel
Header: 40.00" x 6.50" 40 Bolt Holes Mack Top Tank
Two flanges with two 7/16 " N.C. threads in each. One 1.00 " O.D. pipe connection facing driver
MKPS06700ST
 
MKPS06700ST
Steel
Length: 29.00" Top Bottom Flange: 6.00" x 4.87" Mack Side Frame
Flanges on both ends have 8 holes, 4 tapped 5/16 " N.C. and 4 drilled clearance for 5/16 " bolts. Various other holes for shroud, brackets, etc. NOTE: Frames are interchangeable.
MKPS06710ST
 
MKPS06710ST
Steel
Length: 29.00" Top Bottom Flange: 6.75" x 4.50" Mack Side Frame
Flanges on both ends have 8 holes, 2 tapped 3/8 " N.C. and 6 drilled clearance for 3/8 " bolts. Extra bracket on one side with two 5/16 " N.C. threaded holes. NOTE: Frames are not interchangeable. Order left for driver
MKPS06720ST
 
MKPS06720ST
Steel
Length: 29.00" Top Flange: 6.75" x 4.50" Bottom Flange: 6.00" x 5.00" Mack Side Frame
Top bottom flange each have 8 holes, 4 tapped 5/16 " N.C. and 4 drilled clearance for 5/16 " bolts. One bracket on fan side with two 5/16 " N.C. threaded holes. Various other holes on sides and back for shroud, brackets, etc. NOTE: Frames are not interchangeable. Order left for driver
MKPS06730ST
 
MKPS06730ST
Steel
Length: 39.25" Top Bottom Flange: 6.50" x 4.75" Mack Side Frame
Flanges on both ends have 8 holes, 2 tapped 5/16 " N.C. and 6 drilled clearance for 5/16 " bolts. Various other holes for shroud, brackets, etc. NOTE: Side frames are interchangeable.
MKPS06740ST
 
MKPS06740ST
Steel
Length: 36.75" Top Bottom Flange: 6.50" x 4.75" Mack Side Frame
Flanges on both ends have 8 holes, 2 tapped 5/16 " N.C. thread and 6 drilled clearance for 5/16 " bolts. Various other holes for shroud, brackets, etc. NOTE: Frames are interchangeable.
MKPS06750ST
 
MKPS06750ST
Steel
Length: 42.50" Top Bottom Flange: 6.50" x 4.75" Mack Side Frame
Flanges on both ends have 8 holes, 2 tapped 5/16 " N.C. and 6 drilled clearance for 5/16 " bolts. Various other holes for shroud, brackets, etc. NOTE: Side frames are interchangeable
MKPS06760ST
 
MKPS06760ST
Steel
Length: 43.18" Top Bottom Flange: 6.50" x 7.00" Mack Side Frame
Top flange has 10 holes, 6 drilled clearance for 5/16 " bolts and 4 tapped 5/16 " N.C. threads. Top flange also has a bracket extending the header width to 9.00 ", with two more holes drilled clearance for 5/16 " bolts. Frame has three angle brackets. Various other holes for brackets, shroud, etc. NOTE: Frames are not interchangeable. Order left for driver
MKPS06770ST
 
MKPS06770ST
Steel
Header: 33.00" x 6.25" 40 Bolt Holes Mack Top Tank
Sixteen 5/16 " N.C. threaded holes in baffle. One 3/8 " slot in baffle. One 2.00 " O.D. hose connection on driver
MKPS06780ST
 
MKPS06780ST
Steel
Header: 33.00" x 6.37" 40 Bolt Holes Mack Top Tank
One flange with four 3/8 " N.C. threads. Two 1/4 ", one 3/8 " and one 3/4 " N.P.T. fittings. Two mounting brackets (one on each end) with a three hole pattern on each. NOTE: As there are two locations for the filler neck on this tank, (on top or on front top corner). Specify which location you would like.
MKPS06790ST
 
MKPS06790ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Top Tank
This tank has a 2.00 " diameter hose connection on the driver side of center, a 1/4 " and a 1/8 " NPT flange on the front, a 1.25 " hole on top for filler neck, two 5/16 " NC threaded holes on the top of tank @ 22.00 " centers, and four small holes that drain the surge tank into the header.
MKPS08300ST
 
MKPS08300ST
Steel
Length: 32.06" Top Flange: 9.50" x 4.62" Bottom Flange: 6.75" x 4.62" Mack Side Frame
Top flange has 11 holes, 6 drilled clearance for 5/16 " bolts and 5 taped 5/16 " N.C. Bottom flange has 9 holes, 6 drilled clearance for 5/16 " bolts and 3 tapped 5/16 " N.C. Total of fourteen 3/8 " N.C. threaded nuts on channel, 5 on each side and 4 on flat side of channel. NOTE: Frames are interchangeable.
MKPS08310ST
 
MKPS08310ST
Steel
Length: 32.50" Flange: 7.75" x 5.25" Mack Side Frame
Each flange has 11 bolt holes, 5 drilled 5/16 ". There are two slotted holes on the back of the rail. Seven 5/16 " N.C. nuts on back of rail. Four 3/8 " N.C. threaded holes on fan side of frame. NOTE: Frames are not interchangeable. Order left for driver 's side and right for passenger 's side or pairs.
MKPS08320ST
 
MKPS08320ST
Steel
Header: 42.50" x 7.75" 54 Bolt Holes Mack Bottom Tank
Bottom tank has two mounting plates threaded with 5/8 " N.C. One 1/4 " NPT fitting. One 2.50 " O.D. pipe. One 3/4 " NPT fitting. Two holes for 18.00 " 14 plate oil cooler. NOTE: Oil cooler is NOT included with the tank. Please order oil cooler separately.
MKPS08330ST
 
MKPS08330ST
Steel
Header: 42.50" x 7.75" 54 Bolt Holes Mack Bottom Tank
Bottom tank has one 2.50 " hose connection. One 1/4 " NPT fitting. Two mounting plates threaded 5/8 " N.C. One 3/4 " NPT fitting. Two holes for a 14 plate 18.00 " center oil cooler. NOTE: Oil cooler is NOT included with the tank. It must be ordered separately.
MKPS08340ST
 
MKPS08340ST
Steel
Header: 42.50" x 7.75" 54 Bolt Holes Mack Top Tank
Top tank has one 2.50 " OH hose connection. One 1.00 " bypass connection. One 1.75 " hole on top for a filler neck. One 1/2 " NPT fitting on grill side for sight glass. One angle bracket on top of the tank with six holes. Two 1/4 " NPT fittings. Tank is de-aerated.
MKPS08350ST
 
MKPS08350ST
Steel
Header: 42.50" x 7.75" 54 Bolt Holes Mack Top Tank
This top tank has a 2.25 " diameter hose connection, a 1.00 " bypass connection, a 1.75 " hole on top for a filler neck, a 1/2 " NPT flange on the grill side for a sight glass, an angle bracket on the top of the tank with six holes, and two 1/4 " NPT fittings. This tank is de-aerated.
MKPS08360ST
 
MKPS08360ST
Steel
Length: 34.93" Flanges: 7.75"x 5.25" Mack Side Frame
Flanges have 11 bolt holes, five are 5/16 " N.C. There are five 5/16 " N.C. threaded nuts on each side of the rail. Six 3/8 " N.C. threaded holes on the back. Note: rails are interchangeable left or right.
MKPS08370ST
 
MKPS08370ST
Steel
Header: 42.50" x 7.75"54 Bolt HolesMack Top Tank
This top tank has an angle bracket on the top of the tank with 6 holes, a 1.00 " hose connection in the center of the tank, two 1/4 " NPT fittings, a 1/2 " NPT fitting on the back for a sight glass, a hole for filler neck on the top of the tank, a 1.00 " NPT access for a check valve, and a 3/4 " NPT fitting for a fill bypass.
MKPS08380ST
 
MKPS08380ST
Steel
Header: 42.50" x 7.75" 54 Bolt HolesMack Bottom Tank
This bottom tank has two mounting plates with a 5/8 " NC threaded hole in the center, a 1.00 " diameter hose connection that runs along the front of the tank, a 1.25 " diameter hose connection, and two 1/4 " NPT drain flanges. A baffle divides the tank across the width.
MKPS12190ST
 
MKPS12190ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Top Tank
This tank has a 2.50 " diameter hose connection, a 1.25 " diameter hole in top for a fill neck, a 1/4 " NPT flange on the face of the surge tank, a 3/8 " diameter fitting on the face of the surge tank underneath the 1/4 " flange, and two 3/4 " NPT fittings to accommodate a 1.00 " diameter bypass fitting. This tank is de-airated. Note: this tank 's bolt hole pattern matches tank #MK 679. Front and bottom views shown here
MKPS12200ST
 
MKPS12200ST
Steel
Header: 36.37" x 6.25" 46 Bolt HolesMack Top Tank
This tank has a 2.50 " diameter hose connection, a 1.25 " diameter hole in the top for a filler neck, a 1/4 " NPT fitting on the face of the surge tank, a 3/8 " NPT fitting underneath the 1/4 " fitting, and two 3/4 " NPT fittings to accommodate a 1.00 " diameter bypass. This tank is de-airated. Note: this tank shares the bolt pattern with tank #MK 679. Front and bottom views shown here.
MKPS12210ST
 
MKPS12210ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Top Tank
This tank has combined fittings and connections to serve both Titan and Superliner applications. The hose connections are blocked off, so the appropriate hose connection needs to be opened before installing. Note: this tank shares the bolt pattern with tank #MK 679. Front and bottom views shown here.
MKPS22580ST
 
MKPS22580ST
Steel
Header: 37.00" x 6.87" 44 Bolt Holes Mack Bottom Tank
This tank is similar to tank #MK 662, except with 5/8 " NF mounting nuts instead of brackets, and only one flanged connection. Bolt-on hose connection has a 2.50 " diameter and turns on a 90 degree bend. The tank has a 3/8 " NPT flange in the center for a drain.
MKPS26500ST
 
MKPS26500ST
Steel
Header: 40.25" x 2.75" Mack Solder On Tank
Top Tank This tank has a 2.00 " diameter hose connection 14.00 " from the edge of the tank to the center of the hose connection, and two mounting bosses on each end of the tank to attach side frame. Bottom Tank This tank has 2.50 " diameter hose connection 15.37 " from the edge of the tank to the center of the hose connection, and two mounting bosses at each end of the tank to attach side frames.
MKPS26530ST
 
MKPS26530ST
Steel

Header: 29.50" x 2.75" Mack Solder On Tank

Top Tank This tank has a 2.00 " diameter hose connection 4.00 " from the edge of the tank to the center of the hose connection, a 1/4 " NPT flange on top for a barb fitting, and mounting lugs on each end. Bottom Tank This tank has a 2.00 " diameter hose connection pointing downwards towards the ground, and mounting lugs on each end

MKPS26550ST
 
MKPS26550ST
Steel
Header: 29.12" x 2.50" Mack Solder On Tank
Top Tank This tank has a 2.00 " diameter hose connection angled slightly upwards 6.75 " from the edge of the tank to the center of the hose connection, and a mounting bracket on each end of the tank. Bottom Tank This tank has a 2.00 " diameter hose connection that comes straight out 6.75 " from the edge of the tank to the center of the hose connection, a mounting bracket on each end of the tank, and a 1/4 " NPT flange for a drain cock (supplied). This tank set matches brass kit #MK 9602.
MKPS26600ST
 
MKPS26600ST
Steel
Header: 22.31" x 3.31" Side Rail Length: 30.43"Mack Complete Set
MKPS26610ST
 
MKPS26610ST
Steel
Header: 22.31" x 3.31" Side Rail Length: 35.81"Mack Complete Set
MKPS60100ST
 
MKPS60100ST
Steel
Charge Air Cooler Bracket
This small brackets have a 3-bolt pattern for mounting a Charged Air Cooler to the front of the radiator. Note: matches with tank #MK 6626.
MKPS66010ST
 
MKPS66010ST
Steel
Charge Air Cooler Bracket
This small brackets have a 3-bolt pattern for mounting a Charged Air Cooler to the front of the radiator. Note: matches with tank #MK 6626.
MKPS66020ST
 
MKPS66020ST
Steel

Mack Washer Bar

16.00 " Long Used for MK8173PTO and MK8173PTOA

MKPS66110ST
 
MKPS66110ST
Steel
Header: 33.00" x 6.37" 40 Bolt Holes Mack Bottom Tank
One 2.50 " O.D. hose connection straight out bottom. Tank slopes from end to hose connection.
MKPS66120ST
 
MKPS66120ST
Steel
Header: 28.87" x 6.37" 34 Bolt Holes Mack Cross Flow Tank
This tank has a 2.50 " diameter hose connection, and a 3/8 " NPT flange. Note: tank #MK 6628 is the same tank with a 7 plate oil cooler with 18.00 " centers.
MKPS66130ST
 
MKPS66130ST
Steel

Header: 28.87" x 6.37" 34 Bolt Holes Mack Bottom Tank

This tank has a 2.50 " diameter hose connection with a 3/8 " NPT flange next to it, and a 1.25 " diameter hose connection coming out of the end of the tank at a 90 degree angle and facing into the radiator at about a 45 degree angle.

MKPS66140ST
 
MKPS66140ST
Steel
Header: 42.00" x 6.25" 48 Bolt Holes Mack Bottom Tank
This tank has a 2.50 " diameter hose connection 16.12 " from the end, and two mounting brackets approximately 2.50 " high (they taper about a 1/4 "). Each mounting bracket has a 5/8 " diameter hole and are 20.00 " center to center.
MKPS66150ST
 
MKPS66150ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
One 2.50 " O.D. hose connection, 6.50 " in from end. One mounting bracket 7.25 " high with two 5/8 " diameter holes at 8.00 " centers. Tank is only 1.37 " deep.
MKPS66160ST
 
MKPS66160ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
One 2.00 " O.D. hose connection, straight out to engine on passenger side 11.18 " in. One bracket on each end of tank with a 5/16 " diameter hole in each.
MKPS66170ST
 
MKPS66170ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
MKPS66180ST
 
MKPS66180ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
One 2.50 " hose connection on driver
MKPS66190ST
 
MKPS66190ST
Steel
Header: 36.37" x 6.25" 46 Bolt Holes Mack Bottom Tank
One 2.50 " O.D. hose connection on driver
86 part(s)
parts per page