PRODUCT SEARCH
Loading
Processing, Please wait...
67 part(s)
parts per page
KWPS60230ST
 
KWPS60230ST
Steel
Header: 43.50" x 7.50" 52 Bolt Holes Kenworth Bottom Tank
This basic shallow tank has one large bolt-up style flange with four 3/8 " NC studs The flange is located 18.00 " from edge of the tank to center of the flange Note: the same tank can be ordered with a permanently welded-on hose connection - tank #KW6024
KWPS60240ST
 
KWPS60240ST
Steel
Header: 43.50" x 7.50" 52 Bolt Holes Kenworth Bottom Tank
This tank has a 3.00 " diameter hose connection 18.00 " from the edge of the tank to the center of the hose connection It is the same as tank #KW6023, except the hose connection is permanently welded on instead of a bolt-on type Note: this tank shares the bolt pattern with tank #KW602
KWPS60510ST
 
KWPS60510ST
Steel
Header: 43.50" x 7.25" 30 Bolt Holes Kenworth Bottom Tank
This tank has a bolt on connection in the center of the tank with four 3/8 " NC studs, two 5/8 " NF mounting studs at 16.00 " centers, and a shutter flange on the side of the tank.
KWPS60720ST
 
KWPS60720ST
Steel
Header: 32.12" x 7.37" 40 Bolt Holes Kenworth Bottom Tank
This tank has a 2.50 " hose connection that sweeps upwards towards the engine, and a 1/2 " NPT flange on the bottom of the tank centered towards the grill side. Note: intended for CAT engine application.
KWPS60810ST
 
KWPS60810ST
Steel
Header: 32.12" x 7.37" 40 Bolt Holes Kenworth Bottom Tank
This tank has a 3.00 " diameter hose connection on the passenger side, pointing slightly downward on an angle of approximately 10 degree. The hose connection is 4.00 " long at the longest edge - If your tank 's hose connection is longer than this, you may need tank #KW 608 - check carefully
KWPS60820ST
 
KWPS60820ST

Header: 32.12" x 7.37" 40 Bolt Holes Kenworth Bottom Tank

This tank has a 2.50 " diameter hose connection 9.50 " from the edge of the tank to the center of the hose connection. This tank is identical to tank #KW 6081, except the hose connection is smaller and angles downward more. T600 Kenworth

KWPS60920ST
 
KWPS60920ST
Steel
Header: 32.12" x 7.25" 40 Bolt Holes Kenworth Bottom Tank
One flange, 10.50 " from the end of the tank to the center of the flange with four 3/8 " N.C. bolts.
KWPS61010ST
 
KWPS61010ST
Steel
Length: 7.25" 4 Bolt Holes Kenworth Washer Bar
Washer bar for late model Kenworth
KWPS61020ST
 
KWPS61020ST
Steel
Length: 17.37" 10 Bolt Holes Kenworth Washer Bar
Washer bar for late model Kenworths
KWPS61030ST
 
KWPS61030ST
Steel
Kenworth Hose Connection
Late model Kenworth low flow hose connection 1.00 " OD Matches with tank #KW 610LF, #KW 611LF, #KW 612LF
KWPS61050ST
 
KWPS61050ST
Steel
Length: 32.25" x 7.25" 36 Bolt Holes Kenworth Mounting Bracket
This heavy duty bracket has 36 bolt holes, and a pair of steel mounting rings 1.00 " deep with 1.87 " holes @ 12.00 " centers. Matches with tank #KW 609.
KWPS61060ST
 
KWPS61060ST
Steel
Length: 32.12" x 2.00" 22 Bolt Holes Kenworth Washer Bar
This washer bar is used with top tank #KW 5993.
KWPS61900ST
 
KWPS61900ST
Steel
Length: 40.00" Top Bottom Flanges: 7.31" x 9.12" Kenworth Side Frame
Top bottom flanges each have 12 holes, 10 drilled clearance for 5/16 " bolts and 2 tapped 5/16 " N.C. One
KWPS62100ST
 
KWPS62100ST
Steel
Length: 40.00"Top Bottom Flanges: 7.37" x 7.12"Kenworth Side Frame
Conventional style - offset headers Top and bottom flanges each have 10 holes, 6 drilled clearance for 5/16 " bolts and 4 tapped 5/16 " N.C. Fourteen 1/4 " N.C. threaded holes on side frame for brackets and shroud, etc. Two brackets welded on side of channel, each with 3/4 " diameter hole. NOTE: Side frames are not interchangeable. Order left for driver side or right for passenger side or pairs. LATE MODEL
KWPS62400ST
 
KWPS62400ST
Steel
Length: 34.87" Top Bottom Flanges: 7.50" x 7.25" Kenworth Left Side Frame
Top and bottom flanges have 10 holes each, all drilled clearance for 5/16 " bolts. Various 1/4 " N.C. threaded holes for brackets and shroud, etc. One bracket welded on back of channel near top. NOTE: Side frames are not interchangeable. Order left for driver
KWPS64200ST
 
KWPS64200ST
Steel
Length: 34.87" Top Bottom Flanges: 7.50" x 7.25" Kenworth Right Side Frame
Top and bottom flanges have 10 holes each, all drilled clearance for 5/16 " bolts. Various 1/4 " N.C. threaded holes for brackets and shroud, etc. One bracket welded on back of channel near top. NOTE: Side frames are not interchangeable. Order left for driver
KWPS80610ST
 
KWPS80610ST

Length: 43.50" Mounting Bolts: 14.25" from side

KWPS91080ST
 
KWPS91080ST
Steel

Header - 31.62" x 2.75" 2.50" Hose Connection

The hose connection is 2.50 " in diameter on a 90 degree angle 4 mounting bosses to attach the side frames One 1/4 " NPT flange for a drain/expansion fitting

67 part(s)
parts per page