PRODUCT SEARCH
Loading
Processing, Please wait...
114 part(s)
parts per page
INPS65570ST
 
INPS65570ST
Steel
Length: 42.62" Flange: 6.00" x 7.37" International Side Frame
Top frame has ten 5/16 " studs. NOTE: Goes with tank #IN 648LF
INPS65580ST
 
INPS65580ST
Steel
Length: 42.62" Flange: 6.00" x 7.37" International Side Frame
Bottom rail. Flange has 13 bolt holes. There are two mounting brackets 27.00 " center to center. Six 5/16 " N.C. mounting studs.
INPS65590ST
 
INPS65590ST
Steel
Length: 42.75" Flange: 6.00" x 7.50" International Side Frame
This frame has a large mounting bracket on the back of the frame slightly off center, four 3/8 " NC threaded holes on each side of the frame, and four 5/16 " NC threaded studs along the side of the frame. Note: this frame matches tank #IN 647 and tank #IN 511.
INPS65600ST
 
INPS65600ST
Steel
Length: 29.50" Flange: 6.25" x 6.50" International Side Frame
This frame has five 5/16 " NC threaded holes along the fan and grille side for fan guard mounting, and six 3/8 " NC threaded holes along the back of the frame for mounting the radiator. Each flange has 10 bolt holes. Note: this frame matches tank #IN 6408 and tank #IN 6409.
INPS65610ST
 
INPS65610ST
Steel
International Bracket Dimensions: 6.25" x 5.00" 6 Bolt Holes
This mounting bracket has four 3/8 " NC threaded holes on top, and six mounting bolt holes at the base. Used in conjunction with #IN 6560 frames. Bolt pattern matches tank #IN 6408 / #IN 6409.
INPS69420ST
 
INPS69420ST
Steel
Header: 27.50" x 6.12" 38 Bolt Holes International Cross Flow Tank
This tank has a 2.50 " diameter hose connection 8.25 " from the end, coming out on approximately a 60 degree angle and turned on approximately a 30 degree angle There is a 1/4 " NPT flange on each end
INPS81280ST
 
INPS81280ST
Steel
Header: 27.50" x 7.00" 44 Bolt Holes International Complete Radiator Set
Top Tank : This tank has a 2.75 " diameter hose connection 3.00 " long 1/4 " NPT flange 1.25 " diameter hole in to top center of the tank for a filler neck Bottom Tank : This tank has a 2.75 " diameter hose connection 3.00 " long Two 1/4 " NPT flanges for drains Side Frames : These frames have 11 bolt holes A bracket for mounting with a 5/8 " diameter hole Note: this rad set is supplied with four washer bars 17.25 " long with 11 bolt holes.
INPS81700ST
 
INPS81700ST
Steel
International Bracket
Two slotted holes along the narrow portion to bolt to the side frame 3 slotted holes on the short wide portion to bolt into the machine Note: fits with bottom frame #IN654B
INPS82180ST
 
INPS82180ST
Steel
Header: 27.50" x 7.00" 44 Bolt Holes International Complete Radiator Set
Top Tank : This tank has a 2.75 " diameter hose connection 3.00 " long 1/4 " NPT flange 1.25 " diameter hole in the top center of the tank for a filler neck Bottom Tank : This tank has a 2.75 " diameter hose connection 3.00 " long that points downwards 1/4 " NPT flange for a drain cock Side Frames : These frames have 11 bolt holes Mounting bracket with a 5/8 " diameter hole A bracket along the fan edge to mount the shroud with a slotted hole on top for bolt clearance Note: this rad set is supplied with four washer bars 17.25 " long with 11 bolt holes, and two CAC mounting brackets.
INPS92000ST
 
INPS92000ST
Steel
Header: 29.12" x 3.00" International Tank
INPS92010ST
 
INPS92010ST
Steel
Header: 26.50" x 3.00" International Tank
INPS92020ST
 
INPS92020ST
Steel
Header: 26.25" x 3.25" International Tank
INPS92030ST
 
INPS92030ST
Steel
Header: 29.12" x 3.00" International Tank
INPS92060ST
 
INPS92060ST
Steel
Header: 31.37" x 3.00" International Tank
INPS92130ST
 
INPS92130ST
Steel
Header: 25.37" x 3.00" International Tank
Both hose connections are 2.25 " OD, top tank 14.25 " from end to center, bottom tank conn. 11.00 " from end to center, bottom tank is 4.00 " high.
114 part(s)
parts per page