PRODUCT SEARCH
Loading
Processing, Please wait...
60 part(s)
parts per page
GEPS11170ST
 
GEPS11170ST
Steel
Header: 21.00" x 6.75" 28 Bolt Holes
Top Tank: This tank has a height of 3.50 " 2.00 " diameter hose connection 3.00 " from the edge of the tank to the center of the hose connection The hose connection is 3.00 " long. 1.37 " hole to accommodate a filler neck, 6.50 " from the edge of the tank. Bottom Tank: This tank is identical to the top tank, except without the filler neck hole. Note: This set comes with 4 washer bars 21.00 " long with 12 bolt holes, and 4 washer bars 4.25 " long with 2 bolt holes. Lift Trucks & Equipment
GEPS11570ST
 
GEPS11570ST
Steel
Header: 31.00" x 7.00" 42 Bolt Holes Crane Carrier Complete Set
Tanks: Both of these tanks are identical 2.50 " diameter hose connection 4.00 " from the edge of the tank to the center of the hose connection 3/8 " NPT flange of the end of the tank. Frames: 35.00 " long 2 - 3/4 " studs 2.00 " long on the one frame
GEPS12060ST
 
GEPS12060ST
Steel
Header: 32.00" x 8.00" 40 Bolt Holes
This Generator tank set has a top and bottom tank which are identical to each other, with the exception that the top tank has a fill neck hole in the top center of the tank The tank has a 2.00 " diameter hose connection 4.00 " long, placed 3.50 " in from the edge of the tank to the center of the hose connection Two threaded bars at each end of the tank for mounting purposes There are two 3/4 "NPT flanges @ 18.00 " centers to accommodate sensors, ect. Side Frames: These 25.75 " tall side frames have 5 bolt holes at each end. Lift Trucks & Equipment
GEPS12370ST
 
GEPS12370ST
Steel
Header: 30.37" x 7.00" 42 Bolt Holes
This Volvo bottom tank has a 2.50 " diameter hose connection 6.50 " from the edge of the tank to the center of the hose connection, slightly offset from dead center, facing downward. There is one large mounting bracket 5.50 " tall with a pair of 5/8 " NC threaded bolts at 8.00 " centers.
GEPS12480ST
 
GEPS12480ST
Steel
Header: 28.75" x 12.00"58 Bolt Holes
This top tank is essentially a #627 modified for a low flow application One new pipe connection Blank plate This tank is fitted with a check valve.
GEPS12490ST
 
GEPS12490ST
Steel

Header: 28.75" x 6.87" 50 Bolt Holes Bottom Tank

Lift Trucks & Equipment

GEPS12570ST
 
GEPS12570ST
Steel
Header: 42.00" x 6.50" 48 Bolt Holes Paling Unit Complete Set
Top Tank: This tank has a 2.50 " diameter hose connection 13.00 " from the edge of the tank to the center of the hose connection (4.00 " long) 2 - 1/4 " NPT flanges located just above the de-airation baffle 9.00 " and 12.00 " from the edge of the tank 1/4 " NPT flange on the top of the tank for a vent tube Each end of the tank has a 9/16 " diameter hole for lifting Bottom Tank: This tank has a 2.75 " diameter hose connection 11.00 " from the edge of the tank to the center of the hose connection (angled 15 degrees upwards, 4.75 " long) 1/2 " NPT drain flange 7.12 " from the edge of the tank 2 - 11/16 " diameter holes at 36.50 " centers for mounting The outer ends of the tank slant inwards to allow for mounting holes. Side Frames: Plain Frames 33.75 " in height. Lift Trucks & Equipment
GEPS12670ST
 
GEPS12670ST
Steel
Header: 35.50" x 5.75" 42 Bolt Holes International Loader
Top Tank : This tank has a 2.25 " diameter hose connection 8.37 " from the edge of the tank to the center of the hose connection A large sight glass boss on the grill side of the tank (slightly off center) Truck size fill neck hole on the top center of the tank 3/8 " NPT fitting on the grill side of the tank next to the sight glass This tank contains a deflection baffle Bottom Tank : This tank has a 3.00 " diameter hose connection 4.50 " from the edge of the tank to the center of the deflection baffle 3/4 " NPT drain fitting 3.00 " from the edge of the tank Side Frames : There is one mounting bracket on top of the frame 1/2 " NC threaded boss near the bottom of the frame. Lift Trucks & Equipment
GEPS12770ST
 
GEPS12770ST
Steel
Header: 48.25" x 9.12"60 Bolt Holes
Top Tank: This tank has two 2.50 " diameter hose connections 1.00 " diameter hose connection 1/4 " NPT flange 1.75 " diameter hole in the top center of the tank for a filler neck Bottom Tank: This tank has a 3.50 " diameter hose connection 4 - 1/2 " diameter holes for mounting - the two inside holes are threaded at 1/2 " NC.
GEPS12880ST
 
GEPS12880ST

Header: 25.00" x 8.50"36 Bolt Holes

This bottom tank has a 2.00 " diameter hose connection 1/4 " NPT flange for a drain 2 mounting pads @ 18.00 " centers A 12 plate oil cooler with 16.00 " centers (in place of the tube bundle type cooler). Lift Trucks & Equipment

GEPS21970ST
 
GEPS21970ST
Steel

Header: 29.00" x 6.50"38 Bolt Holes

Top Tank: This tank has a 1.75 " diameter hose connection centered in the tank 1.75 " diameter pipe to accommodate a filler neck on the top of the tank Bottom Tank: This tank has a 2.00 " diameter hose connection 8.00 " from the edge of the tank to the center of the hose connection 1/4 " NPT flange for the drain 6.00 " from the edge of the tank Side Frames: 22.75 " long NOTE : Set comes with four 21.00 " long washer bars with 11 bolt holes. Lift Trucks & Equipment

GEPS26070ST
 
GEPS26070ST
Steel
Header: 27.50" x 8.75"36 Bolt Holes
This bottom tank has a pair of 1/2 " NC threaded studs 3.00 " long on each end 2 - 2.50 " NPT nipples 3.75 " in from each end 4 - 1/2 " NPT couplings for drainage (two on the front and two on the back) Baffle that splits the tank from left to right. Lift Trucks & Equipment
GEPS28080ST
 
GEPS28080ST
Steel
Header: 47.00" x 7.00" 52 Bolt Holes
Top Tank: This tank has a 2.50 " diameter hose connection 3/4 " NPT fitting for a bypass hose 1/2 " NPT flange on the end of the tank and one on the back for a sight glass 1/4 " NPT flange on the front and one on the back for a sensor 1.75 " diameter hole on the top at one end for a filler neck Bottom Tank: This tank has a 2.50 " diameter hose connection 1/4 " NPT flange for a drain cock 2 - 3/4 " thick mounting plates with 1/2 " NC threaded holes in the center Side Frames: 10 - 5/16 " threaded nuts, five along the grill side and five along the fan side Mounting block at each end 2 - 1/2 " NC threaded holes Each horseshoe flange has eight 3/8 " diameter holes to accommodate 5/16 " bolts. Lift Trucks & Equipment
GEPS31190ST
 
GEPS31190ST
Steel
Header: 34.50" x 6.75"40 Bolt Holes
This tank is the same as a Freightliner #FR454 except the bolt on flange is 8.00 " off center instead of in the center. The bolt pattern is also the same.
GEPS31370ST
 
GEPS31370ST
Steel
Top Header: 72.00" x 10.00" Bottom Header: 72.00" x 8.00"
This set includes all washer bars and center bar The bottom tank has a 5.00 " diameter hose connection The top tank is de-aerated The side frames are 11.75 " wide, and the headers are offset because of the larger header size of the top tank (all components line up on the grill side). Lift Trucks & Equipment
GEPS31470ST
 
GEPS31470ST
Steel
Header: 31.00" x 6.37" 36 Bolt HolesHobart Welder Bottom Tank
2.00 " diameter hose connection 5.87 " from the edge of the tank to the center of the hose connection 1/4 " flange on the bottom of the tank Mounting bracket on each end of the tank with a 1/2 " diameter hole. Lift Trucks & Equipment
GEPS31780ST
 
GEPS31780ST
Steel
Header: 37.00" x 6.50" 46 Bolt Holes Woodchipper Complete Set
Top Tank: This tank has a 2 1/2 " diameter hose connection 1/4 " NPT flange 1 3/4 " diameter hole for a filler neck Bottom Tank: This tank has a 2 1/2 " diameter hose connection 1/4 " NPT flange for a drain cock This set comes with a fan shroud 42.00 " high, 37.00 " wide, 2.87 " deep, with a 31.00 " diameter hole 4 washer bars also supplied 27.87 " long with 14 bolt holes. Lift Trucks & Equipment
GEPS32270ST
 
GEPS32270ST
Steel
Header: 29.50" x 6.50" 38 Bolt Holes Paling Complete Set
Top Tank: This tank has a 2.50 " diameter hose connection 2.75 " from the edge of the tank to the center of the hose connection 1/4 " NPT flange 11.25 " from the edge of the tank 1/2 " NPT flange 4.00 " from the edge of the tank for a sight glass 1.75 " diameter hole on the top center of the tank for a truck fill neck 1/4 " NPT flange 3.00 " from the edge of the tank for an expansion tube 1/2 " flange in the end of the tank for a sight glass Bottom Tank: This tank has a 1/4 " NPT flange 2 1/2 " from the edge of the tank for a drain 2 3/4 " diameter hose connection 2 3/4 " from the edge of the tank to the center of the hose connection Frames: Frames are 34 " long with 9 bolt holes per flange. Note : tank set comes with washer bars. Lift Trucks & Equipment
GEPS41680ST
 
GEPS41680ST
Steel
Header: 34.00" x 6.62" 42 Bolt Holes
This tank has a 2.50 " diameter hose connection PTO cutout in the center of the tank with a 1/4 " NPT flange on each side 2 - 1/2 " NC threaded nuts for mounting purposes. Lift Trucks & Equipment
GEPS42080ST
 
GEPS42080ST
Steel
Header: 30.00" x 6.50" 38 Bolt Holes Generator Complete Set
Tanks (both are identical) These tanks have a 2.00 " diameter hose connection Two 1/4 " NPT flanges Two threaded bars with two 1/2 " NC holes on each end to mount the side frames Top tank has a hole in the top center for a filler neck Side Frames : Each of these frames has eight 3/4 " diameter holes to mount to the tanks Two 1/2 " thick feet on the bottom with two 3/4 " diameter holes for mounting to the floor This tank set includes four long and four short washer bars. Lift Truck & Equipment
GEPS42290ST
 
GEPS42290ST
Steel
Header: 23.50" x 6.68" 32 Bolt Holes
These tanks are used for core testing, and have a 1/4 " NPT flange on top to allow for a pressure line. Lift Trucks & Equipment
GEPS42480ST
 
GEPS42480ST
Steel
Header: 55.50" x 8.75" 64 Bolt Holes
This bottom tank is a basic blank tank with four 1/2 " NC threaded studs on each end. Lift Trucks & Equipment
GEPS42990ST
 
GEPS42990ST
Steel
Header: 86.87" x 8.62" 104 Bolt Holes Center Bar for Four Core Radiator
This center bar is 1.00 " thick by 1.25 " wide headers. The original radiator template was 43.25 " x 8.62 " with 52 bolt holes Lift Trucks & Equipment
GEPS46090ST
 
GEPS46090ST
Steel
Header: 37.50" x 6.50" 42 Bolt Holes
2 - 2.25 " diameter hose connections 1/2 " NPT flange for a sight glass 1/4 " NPT flange for a sensor A hole in the top for a filler neck Lift Trucks & Equipment
GEPS51290ST
 
GEPS51290ST
Steel
Header: 42.37" x 7.87" 52 Bolt Holes
Top and Bottom Tanks: 2.50 " NPT coupling 1/4 " NPT flange Side Frames: These frames have flanges that are 7.87 " wide x 6.00 " deep 2 - 1/2 " NC threaded holes to accommodate lifting hooks Note: this set is supplied with four washer bars 30.37 " long with 15 bolt holes. Lift Trucks & Equipment
GEPS51390ST
 
GEPS51390ST
Steel
Header: 31.00" x 8.50"
This is a blank tank with large brackets roughed in on the top. Customer to finish the bolt holes, etc, to accommodate the application. Lift Trucks & Equipment
GEPS51470ST
 
GEPS51470ST
Steel
Header: 34.00" x 6.25" 42 Bolt Holes Generator Complete Set
Top Tank : This tank has a 2.00 " diameter hose connection 1/4 " NPT flange to accommodate an expansion tube Bottom Tank : This tank has a 2.00 " diameter hose connection 1/4 " NPT flange to accommodate a drain cock Side Frames : These frames have four 5/16 " NC nuts along the fan and grill side A 8.37 " diameter bolt hole flange Note: this set comes supplied with four washer bars 24.87 " long with 13 bolt holes. Lift Trucks & Equipment
GEPS51490ST
 
GEPS51490ST
Steel
Header: 41.50" x 7.12" 40 Bolt Holes Locomotive Bottom Tank
This tank has a 2.00 " NPT coupling 2 mounting blocks with a hole for the bolts. Lift Trucks & Equipment
GEPS51990ST
 
GEPS51990ST
Steel
Header: 68.00" x 7.00" 76 Bolt Holes
Top Tank: This tank has a 4.00 " NPT coupling A hole for a filler neck in the top center of the tank 4 - 1/2 " NC threaded holes at each end of the tank to attach the side frames Bottom Tank: This tank has a 4.00 " NPT coupling 3/4 " NPT coupling for a drain 4 - 1/2 " NC threaded holes at each end of the tank to attach the side frames Side Frames: These frames have eight holes to accommodate 1/2 " bolts to attach to the tanks A hole to accommodate a lifting hook 2 holes in the foot plate to attach to a mounting block Series of 3/8 " diameter holes Note: this set comes supplied with four washer bars 66.00 " long with 33 bolt holes, and four washer bars 7.00 " long with 5 bolt holes. Lift Trucks & Equipment
GEPS52080ST
 
GEPS52080ST
Steel
Header: 50.00" x 7.50" 64 Bolt Holes
Top Tank: This tank has a 2.25 " diameter hose connection 1.00 " diameter bypass connection 1/4 " NPT flanges for sensors etc 1/2 " NPT flange on the grill side for a sight glass 2 - 1/2 " NC threaded holes on each end for lifting Bottom Tank: This tank has a 2.50 " diameter hose connection 1/2 " NPT flange 2 - 10 plate oil coolers with 18.00 " centers 2 - 1/2 " NC threaded holes for mounting Side Frames: 5 - 5/16 " threaded holes along each side for mounting the shroud Block with two 1/2 " NC threaded holes for mounting Note: this set is supplied with four long washer bars. Lift Trucks & Equipment
GEPS52370ST
 
GEPS52370ST
Steel
Header: 37.50" x 6.50"42 Bolt Holes Generator Bottom Tank
This bottom tank has a 3.50 " hose connection in the center of the tank, facing downward, and offset to the one side. Lift Trucks & Equipment
GEPS52980ST
 
GEPS52980ST
Steel
Header: 52.25" x 8.50" 60 Bolt Holes
Top Tank: This tank has two 2.50 " diameter hose connections 2 - 1/2 " NPT flanges 4 - mounting blocks ( 2 on top and 2 on the ends) Bottom Tank: This tank has a 4.00 " diameter hose connection 2 mounting pads 2 mounting blocks 1/2 " NPT flange Side Frames: These frames are 58.50 " long, with an angle running along one edge The angle has six 7/16 " diameter holes @ 9.50 " centers Note: this tank set is supplies with an assortment of twelve washer bars. Lift Trucks & Equipment
GEPS57070ST
 
GEPS57070ST
Steel
Header: 37.12" x 8.12"48 Bolt Holes Generator Complete Set
Top Tank : This tank has a 1.75 " diameter hole on the top center to accommodate a truck filler neck 2.25 " diameter hose connection 1/8 " diameter bypass hose A de-aeration baffle A curved bar with threaded holes to attach the engine cover Bottom Tank : This tank has a 2.25 " diameter hose connection 3/4 " NPT flange for drainage Four 5/8 " NC nuts for mounting Side Frames : These frames have a 9 bolt hole flange Five 5/16 " NC bolt holes run along the width 3/8 " NC nut is in the back center of the frame Two 5/16 " NC nuts are on the back edge Four 5/16 " NC nuts run along the fan side Three 5/16 " NC nuts run along the grill side Note: this set comes supplied with brackets - two bolt holes on one face, and one hole with 1/4 " NC nuts. Lift Trucks & Equipment
GEPS61570ST
 
GEPS61570ST
Steel
Header: 37.93" x 7.50"48 Bolt Holes Stelco Water Truck Tanks and Frames
Top Tank: This tank has a 2.00 " diameter hose connection 11.00 " from the edge of the tank to the center of the hose connection (angled @ 90 degrees) Hose connection has a 1/4 " NPT flange for a drain 2 - 3/4 " NC bolts @ 32.00 " centers 1/4 " NPT flange 9.00 " from the edge of the tank Frames: 29.00 " tall with a 9 bolt flange 4 - 3/8 " NC nuts along the edge of the frame for mounting the fan shroud Lift Trucks & Equipment
GEPS61580ST
 
GEPS61580ST
Steel
Header: 31.50" x 6.12" 42 Bolt Holes
This bottom tank has a 2.50 " diameter hose connection 1/4 " NPT flange for a drain cock PTO cutout in the center of the tank. Lift Trucks & Equipment
GEPS62770ST
 
GEPS62770ST
Steel
Header: 31.00" x 6.37" 36 Bolt Holes Hobart Welder Bottom Tank
This tank has a 1.75 " diameter hose connection 6.75 " from the edge of the tank to the center of the hose connection 1.00 " diameter bypass hose 11.37 " from the edge of the tank 1/4 " NPT flange to accommodate a sensor 1.75 " diameter hole in the top center of the tank to accommodate a filler neck. Lift Trucks & Equipment
GEPS70090ST
 
GEPS70090ST
Steel
Header: 30.37" x 7.00" 42 Bolt Holes Secard Snow Blower Bottom Tank
This tank has a 2.25 " diameter hose connection 2 - 5/8 " NC studs @ 8.00 " centers 1/4 " NPT flange for a drain cock 14 plate oil cooler with fittings @ 18.00 " centers Lift Trucks & Equipment
GEPS71680ST
 
GEPS71680ST
Steel
Header: 29.50" x 6.25" 40 Bolt Holes
Top Tank: This tank has a 1.75 " diameter hose connection 1/4 " NPT flange for an expansion fitting Bottom Tank: This tank has a 2.00 " diameter hose connection 1/2 " NPT flange to accommodate a hose barb 1/4 " NPT flange for a drain Side Frames: These frames are 26.00 " tall Each flange has eight bolt holes Note: this complete tank set is supplied with four washer bars 19.37 " long with 10 bolt holes. Lift Trucks & Equipment
GEPS72160ST
 
GEPS72160ST
Steel
Header: 27.50" x 8.75" 36 Bolt Holes
This top tank has an overall height of 5.00 " 2.50 " NPT nipple hose connection is on the left side 1/2 " NPT coupling for sensor nearby 1/2 " NPT sight glass flange The 2.50 " studs at each end are 3.00 " long Top center of the tank has a truck-sized filler neck hole. Lift Trucks & Equipment
GEPS73090ST
 
GEPS73090ST
Steel
Header: 17.50" x 5.62" 16 Bolt Holes Tractor Bottom Tank
This tank has a bolt-on flange for the hose connection 1/4 " NPT flange for a drain cock Lift Trucks & Equipment
GEPS77080ST
 
GEPS77080ST
Steel
Header: 34.00" x 6.75" 40 Bolt Holes
This bottom tank has a bolt-on style flange PTO cutout with a 1/4 " NPT flange on either side 2 - 5/8 " NC threaded nuts for mounting Lift Trucks & Equipment
GEPS81390ST
 
GEPS81390ST
Steel
Header: 25.50" x 9.00" 36 Bolt Holes Cummins 8.3 Complete Set
Top Tank : This tank has a 2.25 " diameter hose connection 3/4 " diameter bypass hose Two 1/4 " NPT flanges Two 1/2 " diameter flanges for sight glasses 2.00 " diameter pipe on the top for a filler neck Bottom Tank : This tank has a 2.00 " diameter hose connection Three 1/4 " diameter flanges Side Frames : These frames are 44.87 " long and 9.00 " wide There are slotted mounting holes top and bottom Two bolt holes on the bottom Note: this set comes supplied with four long and four short washer bars Lift Trucks & Equipment
GEPS81490ST
 
GEPS81490ST
Steel
Hover Craft Air Deflector
This air deflector is used between OEM #HV003 and #HV004 units. It ensures the highest volume of air flow through the core. Lift Trucks & Equipment
GEPS81990ST
 
GEPS81990ST
Steel
Header: 42.00" x 7.25"50 Bolt Holes Generator Bottom Tank
This tank has a 3.00 " NPT coupling to attach a pipe connection 1/2 " NPT coupling for a drain Two 1/2 " pipes for mounting the tank into the unit Lift Trucks & Equipment
GEPS82190ST
 
GEPS82190ST
Steel
Header: 27.25" x 6.25"34 Bolt HolesBottom Tank
This tank has a 2.00 " diameter hose connection 1/4 " NPT flange 2 mounting holes on the bottom Lift Trucks & Equipment
GEPS82270ST
 
GEPS82270ST
Steel
Header: 39.00" x 7.00" 58 Bolt Holes
Top Tank: This tank has two 1.25 " NPT couplings facing towards the engine Bottom Tank: This tank has two 1.25 " NPT couplings facing towards the ground This set comes with four long washer bars and four short washer bars. Tanks are made from 3/16 " thick #304 stainless steel. Lift Trucks & Equipment
GEPS82360ST
 
GEPS82360ST
Steel
Header: 26.00" x 5.75" 32 Bolt Holes UPS Package Car
This tank has a 2.00 " diameter hose connection that comes out on the bottom of the tank and turns towards the engine @ 90 degrees 2 - 1/2 " NC threaded mounting holes 1/4 " NPT flange for a drain cock.
GEPS82580ST
 
GEPS82580ST
Steel
Header: 49.00" x 8.00" 64 Bolt Holes
Top Tank: This tank has a 2.25 " diameter hose connection 1.00 " diameter fill line 2 - 1/2 " NC threaded nuts 2 - 1/4 " NPT flanges A hole for a filler neck Bottom Tank: This tank has a 2.50 " diameter hose connection 1/2 " NC threaded hole at each end for mounting 2 - 1/2 " NPT flanges (one for a drain on the bottom, and one facing the engine) 2 - 10 plate oil coolers with 18.00 " centers Side Frames: These frames have eleven 3/8 " diameter clearance holes in the flange 5 - 5/16 " NC threaded nuts 33.62 " long Note: this rad set is supplied with four washer bars 37.00 " long with 21 bolt holes Lift Trucks & Equipment
GEPS82960ST
 
GEPS82960ST
Steel
Header: 33.00" x 8.75"42 Bolt Holes
Top Tank: 3.00 " nipple 4.50 " from the edge of the tank to the center of the nipple 1.50 " fill neck hole on the top center Threaded bars on each end to mount the side frames Bottom Tank 2 - 3.00 " nipples 4.50 " in from both ends to the center of the nipples Threaded bars on each end to mount the side frames Baffle that runs widthwise at the center of the tank
GEPS83170ST
 
GEPS83170ST
Steel
Header: 48.00" x 7.00" 54 Bolt Holes Hover Craft Complete Bolt on Set
Top Tank: This tank has a 3.50 " diameter hose connection 2 - angle brackets on each end with two 7/16 " diameter holes to mount side frames 3/8 " NPT coupling for an expansion fitting Bottom Tank: This tank has a 3.50 " diameter hose connection 2 angle brackets on each end with two 7/16 " diameter holes to mount side frames 1.25 " NPT fitting as a filler neck Sides Rails: These rails have eight 7/16 " x 1 " slotted holes to accommodate bolts 2 - 7/16 " diameter holes in the center for the cross bars 3/4 " diameter hole for access to the overflow tube (top frame only) One access hole for the 3/8 " NPT fitting and one access hole for the 1.25 " NPT fitting (top frame only) This set comes with 4 long and 4 short washer bars Fill neck plug 51.00 " threaded cross bars.
60 part(s)
parts per page