PRODUCT SEARCH
Loading
Processing, Please wait...
94 part(s)
parts per page
FRPS20500ST
 
FRPS20500ST
Steel
Header: 27.50" x 3.00"Freightliner Solder On Tank
This tank has a 2.00 " diameter hose connection A 1/8 " NPT fitting for a drain cock Holes @ 18.00 " centers for and oil cooler Two pin mounts for attaching side frames Four mounting nuts on the grill side of the tank Comes with four 5/16 " NPT x 4 " bolts with nuts, and a 1/8 " NPT plug Note: this tank set fits with Mercedes engine.
FRPS20900ST
 
FRPS20900ST
Steel
Header: 39.75" x 2.75" Freightliner/Sterling Top Tank
This tank has a 2.00 " diameter hose connection, six 1/4 " NC threaded nuts (two on the fan side four on the grill side) Two mounting bracket on each end to attach side frames and an expansion fitting
FRPS21990ST
 
FRPS21990ST
Steel
Header: 29.87" x 6.25"42 Bolt HolesFire Truck Bottom Tank
This tank has a 3.00 " diameter hose connection facing the ground 1.75 " diameter hose connection facing the engine Two 3/8 " NPT flanges
FRPS24130ST
 
FRPS24130ST
Steel
Header: 26.50" x 3.12" Freightliner Solder On Tank
Inlet Tank : This tank has a 2.00 " diameter hose connection 6.25 " from the edge of the tank to the center of the hose connection A 1/4 " NPT flange at each end of the tank for drainage Outlet Tank : This tank has a 2.00 " hose connection 7.75 " from the edge of the tank to the center of the hose connection A hole on one end for the fill neck Holes @ 18.00 " centers to accommodate an oil cooler
FRPS24140ST
 
FRPS24140ST
Steel
Header: 28.75" x 3.50" Freightliner Solder On Tank
Top bottom hose connections 2.50 " 6.00 " from end of tank to center of connection Bottom tank has double pins and holes for oil cooler
FRPS24170ST
 
FRPS24170ST
Steel
Header: 26.50" x 3.12" Freightliner Solder On Tank
Both of these tanks are identical Each has a 2.00 " diameter hose connection 6.25 " from the edge of the tank to the center of the hose connection A 1/4 " NPT flange on either end of the tank for a drain cock or an expansion fitting.
FRPS25000ST
 
FRPS25000ST
Steel
Header: 27.50" x 3.00"Freightliner Solder On Tank
This tank has a 2.00 " diameter hose connection A 3/8 " diameter expansion tube coming out of the top of the hose connection Two pin mounts for attaching side frames Four mounting nuts on the grill side of the tank
FRPS30110ST
 
FRPS30110ST
Steel
Header: 30.50" x 6.75"34 Bolt HolesFreightliner Top Tank
Two openin gs of 2.25 " O.D. pipe straight out One 1.00 " O.D. hose connection One 1/8 " N.P.T. fitting on side One bolt-on type filler at the center on the top front corner Built-in baffle
FRPS31370ST
 
FRPS31370ST

Header: 34.50" x 6.75" 40 Bolt Holes Fire Truck Tank

Inlet Tank : This tank has a 2.50 " diameter hose connection 1/4 " NPT flange on each end of the tank Outlet Tank : This tank has a 3.00 " diameter hose connection 1/4 " NPT flange on each end of the tank 1/4 " NPT x 3/8 " diameter 90o hose barb is provided.

FRPS32090ST
 
FRPS32090ST
Steel
Header: 29.87" x 6.25" 42 Bolt Holes Fire Truck Bottom Tank
This tank has a 3.00 " diameter hose connection pointing towards the ground 1.75 " diameter hose connection pointing towards the engine Two 3/8 " NPT flanges for drainage
FRPS35010ST
 
FRPS35010ST
Steel
Header: 30.50" x 6.75"34 Bolt Holes Freightliner Bottom Tank
This tank has a 3 bolt hole triangular flange
FRPS40210ST
 
FRPS40210ST
Steel
Header: 34.50" x 6.75" 38 Bolt HolesFreightliner Top Tank
Two openings of 2.25 " O.D. 90 degree elbows facing down and out slightly to each end of tank One 1.00 " O.D. hose connection Two 1/8 " N.P.T. fittings, one on side and one in top corner (driver 's side) One bolt on type filler at the center of the slanted top Built-in baffle
FRPS40410ST
 
FRPS40410ST
Steel
Header: 34.50" x 6.75" 38 Bolt HolesFreightliner Top Tank
One opening for 2.00 " O.D. pipe on a 45 degree bend facing down One 1.0 " O.D. hose connection One 1/8 " N.P.T. fitting on side One bolt-on type filler at the center on the top Built-in baffle
FRPS40510ST
 
FRPS40510ST
Steel
Header: 34.50" x 6.75" 38 Bolt HolesFreightliner Top Tank
Two openings of 2.50 " O.D. pipe straight out One 1.00 " O.D. hose connection One 1/8 " N.P.T. fitting on side One bolt-on type filler at the center on the top front corner Built-in baffle
FRPS40520ST
 
FRPS40520ST
Steel
Header: 34.50" x 6.75"38 Bolt Holes Freightliner Top Tank
Two openings, one is a 2.25 " O.D. 90 degree elbow facing down (passenger side), one is a 2.25 " O.D. pipe straight out (driver 's side) One 1.00 " O.D. hose connection One 1/8 " N.P.T. fitting on side One 1/4 " fitting on lower corner passenger side One bolt-on type filler at the center on the top front corner Built in baffle
FRPS40710ST
 
FRPS40710ST
Steel
Header: 34.50" x 6.75" 38 Bolt Holes Freightliner Top Tank
One opening of 2.50 " O.D. pipe coming out on approximately a 30 degree angle towards centre of tank. One 1.00 " O.D. hose connection. One 1/8 " N.P.T. fitting on side One bolt-on type filler at the center on the top front corner Built-in baffle
FRPS40810ST
 
FRPS40810ST
Steel
Header: 34.50" x 6.75"38 Bolt HolesFreightliner Top Tank
One opening of 2.50 " O.D. pipe coming out on approximately 30 degree angle towards the center of the tank One 1.00 " O.D. hose connection One 1/8 " N.P.T. fitting on side One bolt-on type filler at the center of the slanted top Built-in baffle
FRPS42110ST
 
FRPS42110ST
Steel
Header: 34.50" x 6.75" 40 Bolt Holes Freightliner Top Tank
Low flow tank with "rounded " header has one 1.00 " O.D. hose connection on driver 's side lower section facing passenger side (on 75 degree angle) One 1.00 " O.D. hose connection on passenger 's side of center facing passenger side and slightly down. One 3/8 " O.D. hose connection on passenger side facing engine Two bolt-on type flanges on top of tank One 1/4 " N.P.T. fitting in built-in baffle for check valve Top driver 's side of tank is cut lower to accommodate air to air cooler NOTE: Check valve installed
FRPS45010ST
 
FRPS45010ST
Steel
Header: 34.50" x 6.75" 38 Bolt HolesFreightliner Bottom Tank
This tank has a 3 bolt hole triangular flange
FRPS45110ST
 
FRPS45110ST
Steel
Header: 34.50" x 6.75" 38 Bolt Holes Freightliner Bottom Tank
This tank has triangular flange with 3 bolt holes, and a channel shaped bracket with a 9/16 " hole welded in center of the tank
FRPS45200ST
 
FRPS45200ST
Steel
Header: 34.50" x 6.75" 40 Bolt Holes Freightliner Cross Flow Tank
This blank tank has rounded corners. There is a 1/4 " NPT flange on each end. Note: matches with tank #FR 459LF
FRPS45300ST
 
FRPS45300ST
Steel
Header: 34.50" x 6.75" 40 Bolt Holes Freightliner Bottom Tank
This tank is the same as tank #FR 453LF, except both hose connections are on the driver side of center, and the baffle splits the tank front to back instead of left to right
FRPS45400ST
 
FRPS45400ST
Steel
Header: 34.50" x 6.75" 40 Bolt Holes Freightliner Bottom Tank
This tank has a "rounded " header, and a bolt-on type flange in the center of the tank with four 3/8 " NC threaded holes
FRPS45510ST
 
FRPS45510ST
Steel
Header: 34.50" x 6.75" 40 Bolt HolesFreightliner Cross Flow Tank
This low flow tank has a "rounded " header There is a 1.25 " diameter hose connection facing straight out 1/4 " NPT flange on the end
FRPS45600ST
 
FRPS45600ST
Steel
Header: 34.50" x 6.75" 40 Bolt Holes Freightliner Cross Flow Tank 1991-2002 FLD120/Classic xL
This tank has a "rounded " header 3.00 " diameter hose connection 1/4 " NPT flange on the end Note: matches tank #FR 458
FRPS61280ST
 
FRPS61280ST
Steel
Header: 30.37" x 7.00" 42 Bolt HolesFire Truck Bottom Tank
This tank has a 3.00 " diameter hose connection 1/4 " NPT flange for a drain 14 plate oil cooler with 18.00 " centers
FRPS61290ST
 
FRPS61290ST
Steel
Length: 43.37" Header: 7.00" x 6.50"Side Frame
This frame has eleven 3/8 " NC theaded hole along the back Six 1/4 " threaded holes along the edges The end flanges have fourteen bolt holes (three of them threaded).
FRPS61980ST
 
FRPS61980ST
Steel
Header: 29.62" x 7.00"36 Bolt HolesFire Truck Bottom Tank
This tank has a 2.75 " diameter hose connection 3.00 " long 1/4 " NPT flange on the grill side for a drain Two 5/8 " NC studs 3.00 " long @ 18.00 " centers A 14 plate oil cooler @ 18.00 " centers (1418PC) (replaces bundle oil cooler).
FRPS71270ST
 
FRPS71270ST
Steel
Header: 29.62" x 6.25"40 Bolt Holes Fire Truck Bottom Tank
This tank has a 2.75 " diameter hose connection (comes out of the tank at 90 degree then angles up towards the engine) A 10 plate 18.00 " center oil cooler(1018PC) A 1/4 " NPT flange A 1/2 " NPT flange
FRPS82770ST
 
FRPS82770ST
Steel
Header: 29.50" x 6.12"40 Bolt Holes Fire Truck Bottom Tank
This tank has a 2.75 " diameter hose connection on the passenger side that bends upwards 1/4 " NPT flange for a drain cock 3/4 " NPT flange 10 plate oil cooler with 18.00 " centers and 1.00 " NPT fittings
FRPS92170ST
 
FRPS92170ST
Steel
Header: 29.62" x 7.00" 36 Bolt Holes Fire Truck Bottom Tank
This tank has a 3.00 " diameter hose connection Two 5/8 " threaded studs @ 8.00 " centers 1/4 " NPT flange on the grill side for a drain cock.
FRPS92670ST
 
FRPS92670ST
Steel
Header: 29.87" x 8.75" 38 Bolt HolesFire Truck Bottom Tank
This tank has a 3.00 " diameter hose connection 14 plate oil cooler with 18.00 " centers Two 5/8 " NC threaded studs @ 22.00 " centers for mounting purposes.
FRPS94000ST
 
FRPS94000ST
Steel
Header: 27.00" x 3.50" Freightliner Solder On Tank
FRPS94010ST
 
FRPS94010ST
Steel
Header: 29.75" x 3.50"Freightliner Solder On Tank
FRPS94020ST
 
FRPS94020ST
Steel
Header: 25.37" x 3.00"Freightliner Sodler On Tank
FRPS94030ST
 
FRPS94030ST
Steel
Header: 32.75" x 3.50"Freightliner Solder On Tank
FRPS94040ST
 
FRPS94040ST
Steel
Header: 26.25" x 3.50" Freightliner Solder On Tank
FRPS94050ST
 
FRPS94050ST
Steel
Header: 25.37" x 3.00" Freightliner Solder On Tank
FRPS94060ST
 
FRPS94060ST
Steel
Header: 26.50" x 3.50" Freightliner Solder On Tank
2.00 " top btm hose connection top connection 6.00 " from end of tank to center of connection bottom connection 7.50 " from end of tank to center of connection, 18.00 " between oil cooler holes
FRPS94070ST
 
FRPS94070ST
Steel
Header: 32.75" x 3.50" Freightliner Solder On Tank
2.50 " hose conn., 5.75 from end of tank to center of conn., available in brass and steel (solder dipped)
FRPS94080ST
 
FRPS94080ST
Steel
Header: 27.37" x 3.00" Freightliner Solder On Tank
2.00 " hose connection, 2.00 " from end of tank to center of connection
FRPS94090ST
 
FRPS94090ST
Steel
Header: 32.75" x 3.50" Freightliner Solder On Tank
hose connection 2.50 "; 5.75 " from end of tank to center of connection
FRPS94100ST
 
FRPS94100ST

Header: 40.87" x 3.50" Freightliner Solder On Tank

both hose conn. 2.50 " available in brass or steel(solder dipped)

FRPS94110ST
 
FRPS94110ST
Steel
Header: 26.25" x 3.25" Freightliner Solder On Tank
2.00 " hose connection, 6.00 " from end of tank to center of connection
FRPS94120ST
 
FRPS94120ST

Header: 32.75" x 3.50" Freightliner Solder On Tank

hose conn. 5.75 " from end of tank to center of connection. Conn. 2.50 " diameter, 1 - 1/4 " NPT fitting on end of tank for drain valve or barb fitting

94 part(s)
parts per page