PRODUCT SEARCH
Loading
Processing, Please wait...
8 part(s)
CGPS21890ST
 
CGPS21890ST
Steel
Header: 36.25" x 7.00" 44 Bolt Holes Champion Grader Bottom Tank
This tank has a 2.25 " diameter hose connection 1/4 " NPT flange for a drain cock Note: this tank is the same as tank #CG 073106A, except with a smaller diameter hose connection Lift Trucks & Equipment
CGPS41770ST
 
CGPS41770ST
Steel
Header: 36.25" x 7.00" 44 Bolt Holes Champion Grader Top Tank
This tank has a 2.50 " diameter hose connection 9.25 " from the edge of the tank to the center of the hose connection 3/4 " diameter bypass hose that bends 90 degrees towards the passenger side Wabco fill neck hole in the top center of the tank (offset towards the grill) 2 - 1/4 " NPT flanges (one in the corner for an expansion fitting, and one in the center for a sensor fitting). Lift Trucks & Equipment
CGPS42470ST
 
CGPS42470ST
Steel
Header: 32.75" x 7.00" 38 Bolt Holes Champion Grader Top Tank
This tank has a 2.00 " diameter hose connection in the middle of the tank 1.75 " diameter hole in the top center of the tank to accommodate a truck filler neck This tank also contains a baffle to create a surge-like area inside the tank. Lift Trucks & Equipment
CGPS51070ST
 
CGPS51070ST
Steel
Header: 36.25" x 7.00" 44 Bolt HolesChampion Grader Bottom Tank
This tank has a 2.25 " diameter hose connection 5.00 " from the edge of the tank to the center of the hose connection 1/4 " NPT flange next to the hose connection to accommodate an expansion tube Lift Trucks & Equipment
CGPS57070ST
 
CGPS57070ST
Steel
Length: 28.25" Header: 7.50" x 1.25" Champion Grader Side Frame
6 - 3/8 " NC threaded holes (three on the fan side on the grill side) 4 - 3/8 " diameter by 3/4 " long slotted holes Lift Trucks & Equipment
CGPS71870ST
 
CGPS71870ST
Steel
Header: 32.25" x 6.75" 38 Bolt HolesChampion Grader Bottom Tank
This tank has a 2.25 " diameter hose connection Shutter flange 2 - 1/4 " NPT flanges on the bottom of the tank PTO cut-out in the center of the tank. Lift Trucks & Equipment
CGPS73160ST
 
CGPS73160ST
Steel
Header: 36.25" x 7.00" 44 Bolt HolesChampion Grader Bottom Tank
2.50 " hose connection 2.75 " long, facing towards the ground Lift Trucks & Equipment
CGPS73170ST
 
CGPS73170ST
Steel
Header: 36.25" x 7.00"44 Bolt Holes Champion Grader Top Tank
Wabco fill neck in the top center of the tank 2.25 " diameter hose connection 2.75 " long 1/4 " NPT flange in the center of the tank facing the engine 3/8 " overflow tube vent The overall height of this tank is 4.00 " (not including the fill neck). Lift Trucks & Equipment