PRODUCT SEARCH
Loading
Processing, Please wait...
35 part(s)
CAPS10590ST
 
CAPS10590ST
Steel
Header: 22.00" x 4.75" Caterpillar Solder On Tank
This tank has a 2.00 " diameter hose connection 1 - 3/8 " NPT flange for a drain 12 plate oil cooler with 16.00 " centers (DRC1216PC) This cooler replaces the original 10 plate 15.50 " center oil cooler. Lift Trucks & Equipment
CAPS12860ST
 
CAPS12860ST

Header: 50.00" x 13.00" 50 Bolt Holes Cat Excavator Tank

Top Tank : This tank has a pair of 4 bolt flanges tapped to 3/8 " NC Filler neck (must be provided by the customer) 1/8 " NPT flange on the top of the tank (for bleeding) 5 bolt flange on the top of the tank The inside of the tank contains a deflection baffle Pair of "threaded ears " on the top of the tank for mounting purposes Bottom Tank : Single 4 bolt flange with holes tapped to 1/2 " NC Lift Trucks & Equipment

CAPS21000ST
 
CAPS21000ST
Steel
Header: 29.50" x 3.25" Caterpillar Solder On Tank
Top Tank : This tank has a 2.00 " diameter hose connection 4.75 " from the edge of the tank to the center of the hose connection 1.37 " diameter hole in the top center to accommodate a filler neck 2 - 5/16 " NC threaded holes on each end of the tank to attach side frames Bottom Tank : This tank is the same as the top tank, except instead of a filler neck hole it has a 1/4 " NPT flange for a drain cock on the engine side of the tank Lift Trucks & Equipment
CAPS21030ST
 
CAPS21030ST
Steel
Header: 18.12" x 4.75" Caterpillar Solder On Tank
Top Tank : This tank has a 2.00 " diameter hose connection 7.75 " from the edge of the tank to the center of the hose connection 1/2 " NPT flange for a sight glass 4 - 5/16 " NC mounting nuts to attach side frames Diffusion baffle Bottom Tank : This tank has a 2.25 " diameter hose connection 3.75 " from the edge of the tank to the center of the hose connection 1/4 " NPT flange for a drain cock 4 - 5/16 " NC mounting nuts to attach side frames. Note: this kit comes with a 1/4 " NPT drain cock Lift Trucks & Equipment
CAPS21060ST
 
CAPS21060ST
Steel
Header: 29.50" x 3.25" Caterpillar Solder On Tank
Top Tank : This tank has a 2.00 " diameter hose connection 1.37 " diameter hole in the top center for a fill neck 2 - 5/16 " NC threaded holes at each end to attach side frames Bottom Tank : This tank has a 2.00 " diameter hose connection 1/4 " NPT flange for a drain 2 - 5/16 " NC threaded holes at each end to attach side frames 3/4 " diameter bypass hose connection Lift Trucks & Equipment
CAPS32390ST
 
CAPS32390ST
Steel
Header: 25.25" x 3.37" Caterpillar Excavator Tank
Top Tank : This tank has a 2.00 " diameter hose connection Hole for a filler neck 2 - 5/16 " NC threaded holes on each side of the tank for attaching the side frames Bottom Tank : This tank has a 2.00 " diameter hose connection 1/4 " flange for a drain cock 2 - 5/16 " threaded holes on each side of the tank for attaching the side frames Lift Trucks & Equipment
CAPS34080ST
 
CAPS34080ST
Steel
Header: 50.00" x 9.00" Bottom Tank
1 mounting flange 2 brackets Lift Trucks & Equipment
CAPS34090ST
 
CAPS34090ST
Steel
Cat Side Rails Left Right 45.00" Long
12.00 " channel Rails are not interchangeable Lift Trucks & Equipment
CAPS34100ST
 
CAPS34100ST
Steel
Header: 50.00" x 13.00"
2 bolt on flanges Each 3.00 " diameter 1 - 1/4 " NPT fitting in center Lift Trucks & Equipment
CAPS34120ST
 
CAPS34120ST
Steel
4 SectionsEach Section: 32.48" x 30.10"
Caterpillar Radiator Lift Trucks & Equipment
CAPS35120ST
 
CAPS35120ST
Steel
4 SectionsEach Section: 44.25" x 36.80"
Caterpillar Radiator Lift Trucks & Equipment
CAPS40980ST
 
CAPS40980ST
Steel
Header: 29.50" x 6.00"Caterpillar Complete Tank
Top Tank : This tank has a 2.50 "diameter hose connection 3.50 " long 1 - 1/4 " NPT flange Bottom Tank : This tank has a 2.87 " diameter hose connection 3.50 " long 1 -1/4 " NPT flange at each end of the tank Includes side frames and shroud Lift Trucks & Equipment
CAPS41080ST
 
CAPS41080ST
Steel
Header: 18.12" x 4.75" Caterpillar Solder On Tank
Top Tank : This tank has a 2.00 " diameter hose connection 1/2 " NPT flange for a sight glass 4 - 5/16 " NC mounting nuts to attach side frames This tank is 2.00 " shallower than the kit #CAT2103CK counterpart Bottom Tank :#CAT2103B This tank has a 2.25 " diameter hose connection 1/4 " NPT flange for a drain cock 4 - 5/16 " NC mounting nuts to attach side frames Lift Trucks & Equipment
CAPS41380ST
 
CAPS41380ST
Steel
18.62" x 21.25" x 2.00" Inlet: 1.75" Outlet: 1.75"
Caterpillar Forklift Radiator Lift Trucks & Equipment
CAPS48090ST
 
CAPS48090ST
Steel
Header: 28.75" x 4.75" Caterpillar Loader Tank
Top Tank : This tank has a 2.25 " diameter hose connection 4 - 5/16 " NC threaded nuts to attach the side frames 1/4 " NPT flange for an expansion fitting Bottom Tank : This tank has a 2.25 " diameter hose connection 1.00 " diameter bypass hose connection 3/8 " NPT flange for a sensor fitting 4 - 5/16 " NC threaded nuts to attach the side frames Lift Trucks & Equipment
CAPS57090ST
 
CAPS57090ST
Steel
Header: 29.87" x 3.75"Caterpillar Solder On Tank
Top Tank : This tank has a 2.00 " diameter hose connection Mounting block on each end with 2 - 5/16 " NC threaded holes Hole in the top center of the tank for a filler neck Bottom Tank : This tank has a 2.00 " diameter hose connection Mounting block on each end with 2 - 5/16 " threaded holes Locating pin to position the radiator into the frame 1 - 1/4 " NPT flange for a drain Lift Trucks & Equipment
CAPS61270ST
 
CAPS61270ST
Steel
Header: 41.00" x 7.50"50 Bolt HolesCat Complete Set
Top Tank : This tank has a 2.25 " diameter hose connection 4 - 1/4 " NPT flanges 3/4 " NPT coupling Hole to accommodate a fill neck 2.50 " NPT coupling on the top of the tank Deflection baffle with a built-in box for the hose connection Bottom Tank : This tank has a 2.50 " diameter hose connection 2 - 1/4 " NPT flanges Frames : 10 bolt flange at each end Bracket along the fan edge for mounting Lift Trucks & Equipment
CAPS70890ST
 
CAPS70890ST
Steel
Header: 16.00" x 5.00" Caterpillar Solder On Tank
Top Tank : This tank has a 2.00 " diameter hose connection 2 lifting brackets on the top of the tank 1.25 " hole on the top for a filler neck 2 threaded mounting nuts on the backside of the tank Bottom Tank : This tank has a 2.00 " diameter hose connection 2 mounting pins on the bottom of the tank 1/4 " NPT flange for a drain cock Lift Trucks & Equipment
CAPS71780ST
 
CAPS71780ST
Steel
Header: 33.50" x 3.50"Caterpillar Solder On Tank
Top Tank : This tank has a 2.00 " diameter hose connection Filler neck hole in the top center of the tank Bottom Tank This hole has a 2.00 " diameter hose connection 1/4 " NPT flange for a drain cock Lift Trucks & Equipment
CAPS80630ST
 
CAPS80630ST
Steel
44.25" x 45.00" x 4.43" Inlet: 2.50" Top Right
Caterpillar Radiator D-8 Lift Trucks & Equipment
CAPS80890ST
 
CAPS80890ST
Steel
28.50" x 29.31" x 4.06" Inlet: 2.50" Top Right Outlet: 2.50" Bottom Left
Military Radiator Lift Trucks & Equipment
CAPS80940ST
 
CAPS80940ST
Steel
38.00" x 38.12" x 4.12" (4 Sections) Inlet: 3.50" Outlet: 3.50"
Caterpillar Radiator D-398 Lift Trucks & Equipment
CAPS81240ST
 
CAPS81240ST
Steel
42.81" x 24.37" x 4.12" Inlet: 2.50" Top Right Outlet: 2.50 Bottom Right
Caterpillar Radiator Lift Trucks & Equipment
CAPS81340ST
 
CAPS81340ST
Steel
27.00" x 21.25" x 2.62" Inlet: 2.00" Top Right Outlet: 2.00" Bottom Left
Caterpillar Radiator Lift Trucks & Equipment
CAPS81370ST
 
CAPS81370ST
Steel
51.00" x 47.50" x 3.62"
Caterpillar Radiator Lift Trucks & Equipment
CAPS81390ST
 
CAPS81390ST
Steel
32.06" x 26.25" x 4.12" Inlet: 3.50" (x2) Outlet: Brida
Caterpillar Radiator D379 Lift Trucks & Equipment
CAPS81440ST
 
CAPS81440ST

42.75" x 44.18" x 5.37" Inlet: 2.50" Top Right

Caterpillar Radiator Lift Trucks & Equipment

CAPS81470ST
 
CAPS81470ST
Steel
45.00" x 48.12" x 4.12"
Caterpillar Radiator 3408, 3412 Lift Trucks & Equipment
CAPS81640ST
 
CAPS81640ST
Steel
25.56" x 25.31" x 3.00" Inlet: 2.50" Top Center Outlet: 2.50" Bottom Left
Caterpillar Radiator Lift Trucks & Equipment
CAPS81680ST
 
CAPS81680ST
Steel
40.00" x 41.56" x 4.75" Inlet: 3.50"(x2) Top Center Outlet: 4.25" Bottom Right
Caterpillar Radiator Energy Plant Lift Trucks & Equipment
CAPS81760ST
 
CAPS81760ST
Steel
35.75" x 34.37" x 3.62" Inlet: 2.75" Flange Top Center Outlet: 3.18" Bottom Left
Caterpillar Radiator MT Engine Lift Trucks & Equipment
CAPS91270ST
 
CAPS91270ST
Steel
Header: 40.00" x 90.12" 38 Bolt Holes Cat Top Tank
This tank has a bolt-up type flange with 4 - 3/8 " NC threaded holes, located in the center of the tank, to accommodate a 2.50 " diameter hose connection There are threaded bars welded along the header, each with 4 - 3/8 " threaded holes 1/4 " NPT flange to accommodate a sensor Raised filler neck hole in the top center of the tank Large opening with a threaded stud in the center (typical Cat filler assembly) Threaded bung on each end each with 5/8 " NC threaded holes (for lifting the radiator). Lift Trucks & Equipment
CAPS91370ST
 
CAPS91370ST
Steel

Header: 34.75" x 5.00"Caterpillar Solder On Tank

2 oil coolers mounted side by side with bolt-on type flanges (to be supplied by the customer) Bolt-on flange connection on the bottom of the tank Lift Trucks & Equipment

CAPS97160ST
 
CAPS97160ST
Steel
Header: 25.00" x 3.25" Caterpillar Solder On Tank
Top and bottom tanks have a 2.00 " diameter hose connection Top tank has a filler neck Bottom tank has a drain cock Both tanks have mounting brackets on each end. Lift Trucks & Equipment
CAPS97280ST
 
CAPS97280ST
Steel
Header: 20.75" x 4.75" Caterpillar Solder On Tank
Top Tank : This tank has a 1.50 " diameter hose connection Filler neck on the top driver side Bottom Tank : This tank has a 1.50 " diameter hose connection Hole for a 1/4 " NPT flange and drain cock (supplied) Larger NPT flange. Lift Trucks & Equipment